Sony XVS-7000 Users Guide - Page 224

Signal inversion (Invert) Inverts the input video signal and/or key signal horizontally or vertically. You can make separate settings for the front and back (see page 272). Three-Dimensional Transform Operations Use the device control block (trackball) to execute threedimensional DME transforms. Horizontal inversion Input signal Vertical inversion Key density adjustment You can adjusts the key density for the key signal input to the DME (see page 272). Key source selection You can select either the key signal received from the switcher or the key signal generated in the DME for application for the front and back (see page 223) of the image (see page 272). Three-Dimensional Transform Basic Operations Channel selection buttons DME button Color mix settings You can combine two colors with a pattern generator, which can be used to fill parts such as a background or border (see page 240). Color 2 Color 1 Global Effects Global effects are special effects created by combining the images of successive channels. The following types of global effects are available. • Combiner • Brick • Shadow Operation buttons Z-ring Trackball Device control block (trackball) Buttons used in three-dimensional transform operation mode LOCAL: Enables operations in local space (selectable simultaneously with [GLB] button). GLB (global): Enables operations in global space (selectable simultaneously with [LOCAL] button). SRC (source): Enables operations in DME source space (not selectable simultaneously with [TRGT] button). TRGT (target): Enables operations in DME target space (not selectable simultaneously with [SRC] button). AXIS LOC (axis location): Moves the rotational axis of the image in the X-axis and Y-axis directions using the trackball, and in the Z-axis direction using the Z-ring. ASP PERS (aspect/perspective): When the [SRC] button is lit, this changes the aspect ratio of the image in the X-axis and Y-axis directions independently using the trackball, or in the X-axis and Y-axis directions simultaneously using the Z-ring. When the [SHIFT] button is held down and this button is pressed, the trackball controls the skew of the image in the X-axis 224