Sony XVS-7000 Users Guide - Page 72
signal ground terminal, AC IN AC power input A and B connectors
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Rear view MKS-X2700 h SERIAL TALLY 1 and 2 connectors g REMOTE 1 to 6 connectors a U terminal b -AC IN A and B connectors MKS-X7700 j TALLY/GPI IN 1 to 34 connectors i TALLY/GPI OUT 1 to 36 connectors c REF IN connectors d UTIL connector e MVS connector f S-BUS connector g REMOTE 1 to 6 connectors (when MKS-X7702 is installed) a U terminal i TALLY/GPI OUT 1 to 54 connectors (when MKS-X7701 is installed) b -AC IN A and B connectors j TALLY/GPI IN 1 to 68 connectors h SERIAL TALLY 1 and 2 connectors g REMOTE 1 to 4 connectors c REF IN connectors d UTIL connector e MVS connector f S-BUS connector a U (signal ground) terminal Connect to the system ground. b -AC IN (AC power input) A and B connectors (3-pin) Connect to 100 V to 240 V AC power supply with the optional AC power cords. The unit is equipped with two power supplies. When A or B power supply is normal, unit operation can proceed. c REF IN (reference video signal input) connectors (BNC type) Connect to an HD tri-level sync signal, black burst signal, or analog sync signal when using the unit synchronized to an external sync signal. The two connectors are link through, so that the signal input on either connector is also output on the other connector. Connect the supplied 75 Ω terminator to the remaining connector if not using the link through output. 72