Sony XVS-7000 Users Guide - Page 484
Router Interface and Tally Setup, Router Interface Settings
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 484 highlights
Router Interface and Tally Setup 22 Chapter About router/tally setup A router (routing switcher) and its interface use the S-Bus protocol or NS-Bus protocol. Configure the required settings for router and tally operation to match the protocol (S-Bus/NS-Bus) selected in the switcher system. For details about S-Bus/NS-Bus settings, consult your Sony representative. Router Interface Settings Switcher and external box matrixes can be assigned to S-Bus space/NS-Bus space. The settings used are common to both parallel and serial tallies. Note The range of NS-Bus levels that can be configured on the switcher is 1 to 8 only. Assigning Switcher Inputs/Outputs to S-Bus/NS-Bus Space You can assign the switcher input/output matrix to S-Bus/ NS-Bus space. 1 In the group of the Engineering Setup >Router/Tally >Router menu (7361), select the target switcher to set. SWR1: Switcher 1 SWR2: Switcher 2 2 In the group, select the matrix size to assign to S-Bus/NS-Bus space. 320×348 (Standard): Assign the switcher input/ outputs at 320×348 size. 274×254: Assign the switcher input/outputs at 274×254 size. 272×274: Assign the switcher input/outputs at 272×274 size. 182×256: Assign the switcher input/outputs at 182×256 size. 136×138: Assign the switcher input/outputs at 136×138 size. 128×128: Assign the switcher input/outputs at 128×128 size. 3 Set the following parameters. 484