Sony XVS-7000 Users Guide - Page 212
DMEs, Overview, XKS-8470 HD DME Board
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
DMEs 10 Chapter Overview DME (Digital Multi Effects) allows you to add threedimensional effects such as image movement, rotation, magnification and shrinking, as well as a wide variety of special effects. Up to four DME channels are available. Multiple DME channels can be combined, which allows you to create advanced effects with more complexity. About DME boards XKS-8470 HD DME Board This board is an HD format (1080P, 1080PsF, 1080i, 720P) DME board. It supports DME functionality on two channels per board. XKS-8475 DME Board This board is a 4K format (3840×2160P 2SI) and HD format (1080P, 1080PsF, 1080i, 720P) DME board. It supports DME functionality on one channel in 4K format or four channels in HD format per board. Notes • When the switcher signal format is 3840×2160P SQD or 3840×2160PsF SQD, the DME function cannot be used. • The maximum number of DME boards that can be installed on each switcher and the maximum number of DME channels available are as follows. Switcher XVS-9000 XVS-8000 XVS-7000 XVS-6000 Number of boards XKS-8470: 2 boards XKS-8475: 4 boards a) 2 boards 1 board Number of channels 4 channels 4K format: 2 channels HD format: 4 channels 4K format: 1 channel HD format: 4 channels b) a) Maximum of 4 boards in combination with XKS-8470 b) Maximum of 2 channels on the XKS-8470 • If there is a mix of both XKS-8470 and XKS-8475 in a single switcher, only the DME function of the XKS-8475 is available. • If Ext Out is set as an M/E dedicated output on the XVS-8000, DME effects cannot be used in 4K format. For details, see "Setting the Ext Out mode" (page 458). About Ext In inputs The signal that is input on DME Ext In (AUX bus output) is set using the Setup menu. For details about Ext In settings, see "Assigning an AUX Bus to Ext In on a DME" (page 471). Notes • In 4K format, the Ext In input signal cannot be used. • On the XVS-8000, only primary input and color background signals can be used on Ext In. However, XKS-T8110 IP Input Connector Board input signals cannot be used. When a dedicated input is used, you can select the configured signal in the Engineering Setup >Switcher >Input >Dedicated Input Assign menu (7332.10). About DME function restrictions There are restrictions on the number of DME channels that can be used and on the functions, depending on the switcher and signal format. For differences in functions by switcher, see "XVS-9000/ 8000/7000/6000 System Configuration Comparison" (page 523). For details about restrictions for 4K format, see "4K Format Restrictions" (page 525). 212