Sony XVS-7000 Users Guide - Page 305

Recalling a Register Use the numeric keypad control block to recall a register. For each region there are 99 registers dedicated to keyframes, numbered from 1 to 99. When creating an effect as a user programmable DME, use a 3-digit register number which is commonly used for all DME regions (channels). For details about regions and registers, see "Regions" (page 295) and "Registers" (page 296). Recalling a Register (Numeric Keypad Control Block) EFF button Display EFF DISS button Region selection buttons Numeric keypad buttons UNDO button RCALL button Numeric keypad control block Region selection in the numeric keypad control block Select the target region using the following region selection buttons. [M/E1] to [M/E5], [P/P]: M/E-1 to M/E-5, PGM/PST regions [USER1] to [USER8]: User regions [DME1] to [DME4]: DME channels [DEV1] to [DEV12]: Devices [PBUS]: P-Bus [GPI]: GPI [MCRO]: Macro [RTR]: Router [ALL]: Select all regions at the same time [MASTR]: Master timeline / master snapshot You can select more than one region. The first selected button becomes the reference region, and is lit green. Subsequent selected buttons are lit amber. Pressing one of the amber-lit region selection buttons, while holding down [EFF] or [SNAPSHOT], turns the button green to indicate its corresponding region as the new reference region. When [ALL] is selected or a selected reference region is released, the reference regions will be set according to the precedence order. For details about the precedence order for reference regions, see "Reference region" (page 295). The display shows the selected region name. The reference region is displayed highlighted. If multiple regions are assigned to a green-lit button, an asterisk (*) will appear on the left side of the region name. Notes • The regions that can be selected simultaneously are those assigned to the region selection buttons in the numeric keypad control block. • It is not possible to select the master timeline and other regions simultaneously. If selected simultaneously, the master timeline takes precedence. • For region selection buttons that not set by default, assignment is required in the Setup menu. Up to four regions can be assigned to a button. • The regions that can be selected will differ depending on the function (see page 295). • The regions that are selected when [ALL] is pressed are set in the Setup menu (see page 409). • When [ALL] is pressed while no region is selected, all regions that are currently set will be selected. When [ALL] is pressed while regions are selected, all the selected regions will be deselected. Register selection in the numeric keypad control block Enter the register number using the numeric keypad buttons. The display shows the selected register number and the following information. e: The selected register is empty for the currently selected region. E: The selected register is empty for all selectable regions. L: The selected register is locked. To search for an empty register without specifying a register number, press the [.] (period) numeric keypad button. To search for an empty register common to all selectable regions, press the [.] button again. 305