Sony XVS-7000 Users Guide - Page 191
Applying the primary color correction, effect, Applying the RGB clip effect
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
No. Parameter Adjustment 5 Black Level Black level To return the parameters to their default settings In the group, press [Unity]. Applying the primary color correction effect Carry out the following types of correction to each of the R, G, and B signals. • Black balance adjustment: Sets the output level for a 0% level input signal. • White balance adjustment: Sets the output level for a 100% level input signal. • Gamma correction: Adjusts the curvature of the gamma curve. • Knee correction: Adjusts the position of the peak of the gamma curve. Output level White balance adjustment Black balance adjustment Input level Output level Gamma correction Knee correction Input level Unadjusted signal Adjusted signal 1 In the group of the Aux >Aux Bus >CCR menu (2311), press [Primary CCR], turning it on. 2 In the group, select the target item to set. Black: Black balance adjustment White: White balance adjustment Gamma: Gamma correction Knee: Knee correction 3 Set the following parameters. No. Parameter Adjustment 1 Red R signal adjustment 2 Green G signal adjustment 3 Blue 4 All B signal adjustment Simultaneous RGB adjustment a) a) [Red] value is shown. To return the parameters to their default settings In the group, press [Unity]. Applying the RGB clip effect 1 In the group of the Aux >Aux Bus >CCR menu (2311), press [RGB Clip], turning it on. 2 In the group, select the target item to set. Dark: Dark clip adjustment White: White clip adjustment 3 Set the following parameters. No. Parameter Adjustment 1 Red R signal adjustment 2 Green G signal adjustment 3 Blue 4 All B signal adjustment Simultaneous RGB adjustment a) a) [Red] value is shown. To return the parameters to their default settings In the group, press [Unity]. Enabling/disabling a link group When link group is enabled, selecting a specific AUX bus and setting the color corrector will apply the same setting to all the AUX buses in the same link group. You can temporarily disable a link group to set an individual setting for a specific AUX bus within the link group. For details about link group settings, see "Setting a Color Corrector Link Group" (page 470). 191