Sony XVS-7000 Users Guide - Page 44

Button name SNAPSHOT SHOTBOX MCRO (macro) Description • Switches to snapshot operation mode. • Recalls and saves snapshots. • Switches to shotbox operation mode. • Recalls and saves shotboxes. • Switches to macro operation mode. • Recalls, saves, and edits macros. b Region selection buttons These buttons select the target region to control. You can select more than one region. The first selected button becomes the reference region, and is lit green. Subsequent selected buttons are lit amber. With the exception of the [MASTR] and [ALL] buttons, you can assign arbitrary regions to the region selection buttons in the Setup menu. Up to four regions can be assigned to a button. When a button with more than one region assigned is selected, the reference region is set according to the priority. You can temporarily change the region selection and reference region in the Key Frame >Region Select menu (6117). For details, see "Assigning a Region to the Region Selection Buttons in the Numeric Keypad Control Block" (page 409) and "Recalling regions to edit (menu)" (page 307). Button name M/E1 to M/E5, P/P USER 1 to USER 8 DME1 to DME4 DEV1 to DEV12 P-BUS GPI RTR MCRO MASTR Description Selects the M/E-1 to M/E-5 and PGM/PST regions. Selects the USER1 to USER8 regions. Selects the DME1 to DME4 regions. (Assignment of the [DEV4] to [DEV12] buttons in the Setup menu is required.) Selects the device 1 to device 12 regions. Selects the P-Bus region. Selects the GPI region. (Assignment in the Setup menu is required.) Selects the router region. (Assignment in the Setup menu is required.) Selects the macro region. Selects the master region. Button name ALL Description • Selects all specified regions if there is no region selected. • Deselects all region selections if there is a region selected. c Function selection buttons These buttons are used for recalling and saving shotboxes, snapshots, keyframe effects, macros, and for other tasks. Button name UNDO STORE STATS (store status) TC (timecode) STORE a) RCALL (recall) a) Description After recalling a register, returns to the state before the register was recalled. • Saves data in the register, and the button is lit amber. • When the [STORE STATS] button is lit amber, you can press and hold the [STORE STATS] button and press the [UNDO] button to return to the state before data was saved. Switches the numeric keypad to timecode input mode. • Switches the mode for saving a shotbox, snapshot, keyframe effect, master snapshot, master timeline, or macro in a register (store mode). • During store mode, the [STORE] button is lit amber. • Switches the mode for recalling a shotbox, snapshot, keyframe effect, master snapshot, master timeline, or macro stored in a register (recall mode). • During recall mode, the [RCALL] button is lit amber. a) If more than one region is assigned to a region selection button and there is a region not selected in the Key Frame >Region Select menu (6117), the [RCALL] button or [STORE] button flashes amber (excluding in macro operation mode). d Display The following information is displayed. • Left-side display (rows 1 to 3), right-side display (rows 1 to 2): Name of currently selected region (reference region is highlighted in reverse video) • Right-side display (rows 3 to 4): Register number, input numeric values, and so on e Numeric keypad buttons These buttons are used for entering numeric values and adding snapshot attributes. Button name 0 to 9 Description Enters numeric values. 44