Sony XVS-7000 Users Guide - Page 38
Display, Adjustment knobs, Displays the name of parameter items and the setting, value.
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Button name OVERRIDE TRACE MON (monitor) PROC KEY (processed key) FM FEED (frame memory feed) SHOW KEY Description Assigns a DME channel assigned to another key/bus to the currently selected key (override function). Press and hold the [OVERRIDE] button and press the target DME channel button to change the assignment. When a DME channel is assigned to another key, this switches the delegation to the key assigned with the DME channel (trace function). Press and hold the [TRACE] button and press the target DME channel button to switch the delegation. • Assigns a DME channel output to the monitor signal. Press and hold the [MON] button and press the target DME channel selection button to set it. • You can check the monitor signal assignment status by pressing the [MON] button by itself. Lit amber: Assignable DME channel. Lit green: Currently assigned DME channel. Press the [PROC KEY], turning it on amber, to enable selection of a processed key signal as a re-entry signal (PROC V, PROC K) on a bank (M/E-1 to M/E-5, PGM/PST). Pressing the [FM FEED] button, turning it on amber momentarily, selects the processed key signal on the frame memory source 1 and 2 buses. The [PROC KEY] button is lit amber simultaneously. Displays the processed key source signal on the specified output (edit preview or image creation bank preview) while the [SHOW KEY] button is pressed (or for a preset time) (show key function). The show key function output and preset time are configured in the Setup menu. For details, see "Setting Show Key" (page 468). Button name AUTO DELEG (auto delegation) MORE Description Switches the key control block delegation selection in conjunction with buttons on the following control blocks. • Transition control block: [KEY1] to [KEY8] buttons • Cross-point pad on the cross- point control block: Key 1 to 8 bus delegation buttons [KEY1] to [KEY8] • 1st row on cross-point control block (key/AUX bus delegation mode): [KEY1] to [KEY8] buttons • Memory recall section on the Flexi Pad control block (key operation mode): [KEY1] to [KEY8] buttons • Key fader control block: Key delegation buttons • When there are more than six parameters, this button is lit amber. • Press the [MORE] button, turning it on green, to display the 6th and subsequent parameters. f Display Displays the name of parameter items and the setting value. g Adjustment knobs These buttons adjust the parameters of items selected using the setting buttons. 38