Sony XVS-7000 Users Guide - Page 256

When [Circle], [Rectangle], [Star], or [Heart] is selected No. Parameter Adjustment 1 Magnify H Magnification ratio 2 Curve H Curvature 3 Size H Size 4 Angle Slant angle 5 Aspect Aspect ratio When [Bar] is selected No. Parameter Adjustment 1 Magnify H Magnification ratio 2 Curve H Curvature 3 Size H Size 4 Angle Slant angle When [Cross] is selected Parameter group [1/2] No. Parameter Adjustment 1 Magnify H Horizontal magnification ratio 2 Curve H Horizontal curvature 3 Size H Horizontal size Parameter group [2/2] No. Parameter Adjustment 1 Magnify V Vertical magnification ratio 2 Curve V Vertical curvature 3 Size V Vertical size To make only the lens part visible Press [Lens Only], turning it on. The parts of the image outside the lens are removed. To set the lens center position 1 Press [Position]. 2 Set the following parameters. No. Parameter Adjustment 1 H 2 V a) Lens center position in horizontal direction Lens center position in vertical direction a) Disabled when [Bar] is selected. Circle Settings You can set the size of the circle. You can also make the axis of modulation vertical. Applying the Circle effect In the Non Linear >Circle menu (4141.17), set the following parameter. No. Parameter Adjustment 1 Radius Size of circle To make the axis of modulation vertical Press [Mod V], turning it on. The axis of modulation when modulating to a circle becomes vertical. Panorama Settings You can set the horizontal and vertical curvature, and the curve center position. Applying the Panorama effect In the Non Linear >Panorama menu (4141.18), set the following parameters. No. Parameter Adjustment 1 Curve H Horizontal curvature 2 Curve V Vertical curvature 3 Position H Horizontal curve center position 4 Position V Vertical curve center position Page Turn Settings There are four modes: H&V, H, V, and Off. You can select the turn position, the radius of the turned portion, the amount and angle of turning, and the input video for the front and back pages. Applying the Page Turn effect 1 In the group of the Non Linear >Page Turn menu (4141.19), select the partition method. H&V: The image turns as it is split from the center into 4 parts: left, right, upper, lower. H: The image turns as it is split from the center into 2 parts: left, right. V: The image turns as it is split from the center into 2 parts: upper, lower. When nothing is selected (Off): There are no splits and the image turns from the edge. 256