Sony XVS-7000 Users Guide - Page 164

Basic Independent Key Transition DME Wipe Setting Operations You carry out independent key transition DME wipe setting operations using the DME Wipe Adjust menu for each keyer. For details about independent key transitions, see "Independent Key Transitions" (page 99). This section describes operations of key 1 on the M/E-1 bank (M/E-1 >Key1 >Transition/Video Process >DME Wipe Adjust menu) as an example. Selecting an Independent Key Transition Wipe Pattern 1 In the M/E-1 >Key1 >Transition/Video Process menu (1117), press [DME Wipe Adjust]. The DME Wipe Adjust menu (1117.3) appears. 2 In the group, press [1ch] for 1-channel mode or [2ch] for 2-channel mode. The 1ch Pattern Select menu (1117.4) or 2ch Pattern Select menu (1117.5) appears. 3 Press the button for the desired DME wipe pattern group to select it. The patterns from the selected pattern group appear on the screen. If executing a DME wipe using a resizer Select [Resizer Slide], [Resizer Squeeze], or [Resizer Frame I/O] in the DME wipe pattern group. 4 Press the desired pattern to select it. Setting Independent Key Transition DME Wipe Modifiers You can add modifiers, such as pattern position and size, to an independent key transition DME wipe. For an overview of modifiers and supported pattern numbers, see "DME Wipe Pattern Variation and Modifiers" (page 157). Specifying the DME wipe direction (Direction) In the group of the M/E-1 >Key1 >Transition/ Video Process >DME Wipe Adjust menu (1117.3), select one of the following. Normal: Wipe in normal direction. Normal/Reverse: Wipe in the normal and reverse direction alternately for each transition. Reverse: Wipe in the opposite direction to normal. Modifying a DME wipe pattern edge (Edge) 1 In the group of the M/E-1 >Key1 >Transition/ Video Process >DME Wipe Adjust menu (1117.3), select one of the following. Border: Border Soft Border: Soft border 2 Set the following parameters. When [Border] is selected No. Parameter Adjustment 1 Width Border width 3 Luminance Luminance of border color 4 Saturation Saturation 5 Hue Hue When [Soft Border] is selected No. Parameter Adjustment 1 Width Border width 2 Inner Soft Degree of softness inside the border 3 Luminance Luminance of border color 4 Saturation Saturation 5 Hue Hue Setting the DME wipe pattern position (Positioner) 1 In the group of the M/E-1 >Key1 >Transition/Video Process >DME Wipe Adjust menu (1117.3), press [Position], turning it on. 2 Set the following parameters. No. Parameter Adjustment 1 H Horizontal position 2 V Vertical position 164