Sony XVS-7000 Users Guide - Page 60

No. Parameter Adjustment 3 Density Key density The first adjustment knob or the first parameter setting button sets the [Size] parameter (pattern size). In addition, when the [MENU] button is pressed in the device control block (trackball), turning it on, you can use the trackball and Z-ring to adjust the parameters. • Move the trackball on the X-axis to adjust the 1st parameter, and on the Y-axis to adjust the 2nd parameter. Moving up or to the right increases the parameter value, and moving down or to the left decreases the parameter value. • Turn the Z-ring to adjust the 3rd parameter. Turning clockwise increases the parameter value, and turning counterclockwise decreases the parameter value. Returning Settings to Default Values Press [Default Recall], turning it on, and then press a VF button or parameter setting button to return the parameter values or function enable/disable settings to their default values, in the following groupings. • When a VF button is pressed: Function grouping (functions of the HF buttons at the bottom of the screen) • When a parameter setting button is pressed: Parameter grouping For details on menus that can be returned to their default states, see "Menu Tree" (page 501). Notes • The default state varies depending on the initial status mode specified in the Setup menu. User: State configured by the user Factory: Factory default state For details, see "Power-On (Startup) State Selection" (page 397). • The horizontal (H) and vertical (V) of position setting parameters cannot be returned to their default states individually. For example, returning the horizontal (H) position to its default value also returns the vertical (V) position to its default value automatically, and vice versa. Using a Mouse You can position the mouse cursor over a button and click the mouse instead of pressing (touching) a button on the menu panel. Also, you can use a mouse to set parameters and to scroll lists. Setting a parameter with the mouse To adjust the value of a parameter setting button with the mouse, you can use one of the following three methods. • Position the cursor over the parameter setting button for which you want to adjust the value, and turn the mouse wheel. • Position the cursor over the parameter setting button for which you want to adjust the value, then right-click and drag the bar showing the setting value. • Position the cursor over the parameter setting button for which you want to adjust the value, then left-click and enter a value in the numeric keypad window. Scrolling a list with the mouse Position the cursor over the list you want to scroll, and turn the mouse wheel. In the Setup menu, you can specify the scroll direction and whether parameters increase or decrease in relation to the mouse wheel rotation. And you can also switch the functions of the right and left mouse buttons used when adjusting the value of parameter setting buttons. For details, see "Setting the Mouse Wheel Function when Setting Parameters" (page 438) and "Setting the Mouse Button Function when Setting Parameters" (page 438). Using the Shortcut Menu You can create a shortcut menu by grouping frequently used menus into a kind of "favorites" menu. In addition to menus, menu macros can also be saved in the shortcut menu. For details about menu macros, see "Menu Macros" (page 367). The shortcut menu settings are handled as part of the control panel setup. You can recall and save these settings in the same way as setup data. Recalling a menu from the shortcut menu 1 Open the Home >Favorites >Shortcut menu (0021). 2 Select a group in the group. 3 Press the button to which the desired menu is registered. Registering a menu in the shortcut menu You can register 15 buttons in a single shortcut menu group. The following two registration methods are available. 60