Sony XVS-7000 Users Guide - Page 146
Rotating the wipe pattern Rotation, Setting the aspect ratio of a wipe pattern, Aspect
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
No. Parameter Adjustment 2 Position V Vertical position • Negative values move down. • Positive values move up. To return the pattern position to the center of the screen In the group, press [Center]. To move the pattern from its current position (set by Positioner) to the center of the screen during the course of a transition In the group, press [Auto Center], turning it on. Rotating the wipe pattern (Rotation) You can rotate a pattern. Angle This executes a wipe with the pattern at a fixed angle. Angle disabled Angle enabled Speed This rotates a wipe pattern at a fixed specified speed during a transition. Magnitude This rotates a wipe pattern rotates through the specified angle in a single transition. 1 Open the M/E-1 >Wipe >Main Modify menu (1155). 2 In the group, select the rotation type. 3 Depending on the selection in step 2, set the following parameters. When [Angle] is selected No. Parameter Adjustment 1 Angle Rotation angle of pattern • A value of -100.00 corresponds to a rotation of one turn counterclockwise. • A value of +100.00 corresponds to a rotation of one turn clockwise. • A value of 0.00 corresponds to no rotation. When [Speed] is selected No. Parameter Adjustment 1 Speed Rotation speed of pattern • A value of -100.00 corresponds to 1 rpm counterclockwise rotation. • A value of +100.00 corresponds to 1 rpm clockwise rotation. • A value of 0.00 corresponds to pause. When [Magnitude] is selected No. Parameter Adjustment 1 Angle Angle of pattern at start of transition • A value of -100.00 corresponds to a rotation of one turn counterclockwise. • A value of +100.00 corresponds to a rotation of one turn clockwise. • A value of 0.00 corresponds to no rotation. 2 Magnitude Angle of rotation through course of transition • A value of -200.00 corresponds to a rotation of two turns counterclockwise. • A value of +200.00 corresponds to a rotation of two turns clockwise. • A value of 0.00 corresponds to no rotation. Setting the aspect ratio of a wipe pattern (Aspect) You can freely change the aspect ratio of the pattern. Aspect disabled 146 Aspect enabled