Sony XVS-7000 Users Guide - Page 208
Setup menu when resource sharing is, enabled, Resource assignment, Checking resource sharing settings
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
Resource assignment The following resources are subdivided and assigned to each logical switcher. Resource Inputs Outputs Switcher banks (M/E boards) DMEs (DME boards) Frame memory sources Frame memory outputs Color backgrounds Internal format converters b) Multi viewer outputs a) Multi viewers Unit of subdivision 1 group: 16 1 group: 16 a) 1 group: 12 b) c) 1 board 1 board 2 systems 4 channels 1 system 16 channels 8 1 system a) XVS-9000 only b) XVS-8000/7000/6000 only c) 12 outputs (excluding format converter output connectors and spare connectors) The following resources can be configured for sharing on logical switchers 1 and 2. • Inputs • Frame memory outputs: Sharing is supported only when the signal formats of logical switchers 1 and 2 are the same. • Color backgrounds: Sharing is supported only when the signal formats of logical switchers 1 and 2 are the same. • Internal format converters: If the signal formats of logical switchers 1 and 2 are the same, sharing is supported only for FC channels configured for input use. When resources are shared, operation using the menu is available from logical switcher 1 only.1) On logical switcher 2, only the selection of cross-points of shared resources is available. Information for shared resources are also displayed in the menu of logical switcher 2, but configuration and other operations are not available. 1) Excludes the Engineering Setup >Panel >Xpt Assign >Src Name/Src Color menu (7322.6). Independent menu operation for shared resources is available on logical switchers 1 and 2. Notes • Software licenses for 4K format support are required according to the number of M/E board assigned to the 4K format logical switchers (see page 400). • Subdivided resources have resource numbers that are set for each logical switcher. For example, frame memory outputs 17 to 20 assigned to logical switcher 2 are referred to as FM1 to FM4. • Format converter output connectors and spare connectors are assigned in conjunction with the internal format converter assignments. • If both an XKS-8470 and XKS-8475 are assigned to a single logical switcher, only the DME function of the XKS-8475 is available. • DME functionality on up to four channels can be used on a single logical switcher. • When an internal format converter is shared, the input assigned to the target FC channel must also be shared. Also, the FC channel configured for output use can be used on logical switcher 1 only. • The XVS-9000 has the following restrictions. - The inputs and outputs on an XKS-C9121/ XKS-C9121N board can be set in groups of 16, but if the logical switchers are set to a combination of 4K format and HD format, both the inputs and outputs must be assigned to the same logical switcher. - Multi viewer outputs can be set in groups of 8, but if the logical switchers are set to a combination of 4K format and HD format, all multi viewer outputs must be assigned to the same logical switcher. • The XVS-8000 has the following restrictions. - Dedicated inputs are assigned to logical switcher 1. However, they can be used only when output connectors connected to the dedicated inputs are also assigned to logical switcher 1. - M/E dedicated outputs are assigned to logical switcher 1. - Output connectors 49 to 52 are assigned to logical switcher 1. - When logical switchers 1 and 2 are both set to 4K format, DME Monitor Video is linked to the assignment setting of DME channel 1 of the physical switcher. • The XVS-7000 has the following restrictions. - The same signals on output connectors 9 to 16 of the physical switcher are assigned to the FC9 to FC16 internal format converters. If an output is not assigned to the logical switcher to which the corresponding internal format converter is assigned, a black signal is output from the format converter. - If only one of the logical switchers is 4K format and a color background is assigned to the 4K format logical switcher, selecting a black or white signal on the DME utility 1 bus/2 bus of the other logical switcher will cause the color background image configured on the 4K logical switcher to be output. Setup menu when resource sharing is enabled Checking resource sharing settings When resource sharing is enabled, "On" is displayed in the "Resource Share Mode" field in the Engineering Setup >System >System Config menu (7312). You can press [Resource Share] to display the Resource Share menu (7312.1) to check the logical switcher signal format and resource assignment status. 208