Sony XVS-7000 Users Guide - Page 259

the borders, the shape of the sections that begin to melt, and other parameters. Applying the Melt effect 1 In the group of the Non Linear >Melt menu (4141.27), select the melt method. Up: Melting occurs upward. Down: Melting occurs downward. 2 To make transition settings, press [Transition] and set the following parameters. No. Parameter Adjustment 1 Transition Degree of transition 2 Curve Degree to which image stretches 3 Random Degree of jaggedness at melted part 3 To make wave settings for the melting part, press [Border] and set the following parameters. No. Parameter Adjustment 1 Amp Amplitude of wave 2 Freq Frequency of wave 3 Offset a) Wave phase shift offset 4 Speed b) Direction of travel and speed of wave 5 Slant Slant of border a) Set when [Lock] is enabled. b) Set when [Lock] is disabled. To stop the wave in the melting part Press [Lock], turning it on. The wave alternately stops and starts each time the button is pressed. To select the shape of the part that starts to melt 1 Press [Form]. 2 Set the following parameter. To turn the melting part into stardust 1 Press [Pixel], turning it on. 2 Set the following parameters. No. Parameter Adjustment 1 Density Degree to which image disappears 2 Random Degree to which pixel positions become more randomized further from the center Character Trail Settings You can set the effect starting position, the degree of expansion, the slant angle of the effect region, and trail direction, the degree to which the image disappears, the trail type and amount of stardust, and other parameters. Applying the Character Trail effect In the Non Linear >Character Trail menu (4141.28), set the following parameters. No. Parameter Adjustment 1 Transition Position where effect starts 2 Expand Degree of expansion 3 Trans Angle Angle of slanting in effect region 4 Trail Angle Direction of trail To turn the tip of the trail into stardust 1 Press [Pixel], turning it on. 2 Set the following parameters. No. Parameter Adjustment 1 Density Degree to which image disappears 2 Random Trail type and amount of stardust No. Parameter Adjustment 1 Form Type of waveform a) a) 1 (SINE): Sine wave 2 (PARABOLA): Parabolic wave 3 (TRIANGLE): Triangular wave 4 (RECTANGLE): Rectangular wave 5 (CIRCLE): Circular wave 6 (CUBIC): Cubic curve wave 7 (MELT1): Melt waveform 1 8 (MELT2): Melt waveform 2 259