Sony XVS-7000 Users Guide - Page 526

Item Multi viewers Restrictions In SQD, screen split by 10, 13, and 16 not supported a) You can change the M/E banks that are to be disabled in the Engineering Setup >Switcher >Config >Logical M/E Assign menu (7331.5). Sub key restrictions In 3840×2160P format, key 3 and key 4 are called "sub keys," and the following function and settings restrictions apply. Notes • When the signal format is 3840×2160PsF, sub keys cannot be used. • You can set the sub key mode in the Setup menu (see page 442). Item Transitions Key settings Key material Key priority Resizer Key preview/Show key DMEs Restrictions Independent key transitions only supported However, the following settings are not supported. • Wipe transition type • DME wipe transition type Luminance key and linear key only supported However, the following settings are not supported. • [Filter] parameter • [Key Position] • [Mix Color] in the group • Edge • Mask • Blink On the XVS-8000, primary input, black, white, and color background signals only supported a) However, XKS-T8110 IP Input Connector Board input signals not supported (No restrictions on the XVS-9000/ 7000/6000) Priority settings not supported (Key 4 and key 3 are fixed at the top, in that order, and key 1 and key 2 priority can be configured below key 3.) Resizer not supported Key 3 only supported when the sub key is set to [Key3 + Key PVW]. Functions relating to DMEs not supported a) When a dedicated input is used, signals configured using the Engineering Setup >Switcher >Input >Dedicated Input Assign menu (7332.10) can also be selected. Resource Sharing Configuration Operations Resource sharing is configured using a computer connected to the same network as the switcher control station. Note You can save and recall resource sharing configuration data between the switcher system and a computer using the file manager. For details, see "File Manager" (page 530). Preparations Launch a browser on the computer, and access the menu (Resource Share Setup) for configuring sharing resources. For details about computer connection and accessing the menu, refer to the ICP-X7000 Installation Manual. 1 Access Resource Share Setup. The Resource Share Setup login screen appears. 2 Enter the administrator user name and password, and click/tap [Login]. The Resource Share Setup page appears. Note For the administrator user name and password, refer to the ICP-X7000 Installation Manual. 526