Sony XVS-7000 Users Guide - Page 451

• XKS-C8111 - 3840×2160P 2SI, 1080P: Groups of 4 inputs (1st to 4th inputs only) • XKS-C9111/XKS-C9121 - 3840×2160P 2SI: Groups of 2 inputs (1st and 2nd, 9th and 10th inputs only) - 1080P: Groups of 4 inputs (1st to 4th, 9th to 12th inputs only) 1) Groups of 4 inputs when the conversion format is initially set to 3840×2160P 2SI 3G or 3840×2160P SQD and then the conversion format is changed Notes • When the switcher signal format is 3840×2160PsF or 1080PsF, input signal format conversion is not available. • The signal formats that can be converted vary depending on the input format converter board and the 720P converter setting. For details about the 720P converter, see "Enabling/ disabling the 720P converter" (page 450). Supported formats The supported conversion formats are given below. Note Field frequency and frame frequency conversion is not supported. Switcher signal format 3840×2160P (Level A, 2SI) 3840×2160P (Level A, SQD) 1080P (Level A) 1080i 720P Input signal format • 3840×2160P (Level A, 2SI) 3G a) b) • 3840×2160P (Level A, 2SI) 12G a) c) d) • 3840×2160P (Level B, 2SI) 3G b) • 3840×2160P (Level A, SQD) b) • 3840×2160P (Level B, SQD) b) • 1080P (Level A) • 1080P (Level B) b) • 1080i • 3840×2160P (Level A, 2SI) 3G • 3840×2160P (Level A, 2SI) 12G d) • 3840×2160P (Level B, 2SI) 3G • 3840×2160P (Level A, SQD) a) • 3840×2160P (Level B, SQD) • 1080P (Level A) • 1080P (Level B) • 1080i • 1080P (Level A) a) • 1080P (Level B) b) e) • 1080i e) • 720P b) f) • 1080i a) • 720P b) • 576i g) h) • 480i g) h) • 1080i b) • 720P a) • 576i g) h) • 480i g) h) a) Input signal without format conversion b) Not selectable on the XKS-C8111/XKS-C9111/XKS-C9121 c) "3840×2160P (Level A, 2SI)" on the XKS-C8111/XKS-C9111/ XKS-C9121 d) Not selectable on the XKS-S8111 e) Selectable on the XKS-S8111 when the 720P converter is disabled and on the XKS-S8112/XKS-S9112 f) Selectable on the XKS-S8111 when the 720P converter is enabled and on the XKS-S8112/XKS-S9112 g) Selectable on the XKS-S8111 only h) When the switcher signal format frequency is 59.94, only 480i is selectable. When the frequency is 50, only 576i is selectable. 1 In the Engineering Setup >Switcher >Input >Input FC/ CCR menu (7332.1), press [FC Format]. The FC Format menu (7332.7) appears. The status area shows the input list on the left and the supported conversion signal format list on the right. 2 Select the target input connector board to set. No. Parameter Adjustment 1 Group No Input group number a) a) Inputs on an input connector board form a group. 3 In the list on the left, select the target input to set. Select an input from among the input grouping to set. Note When the switcher signal format is 3840×2160P, only the input with the lowest number in the input grouping can be selected. 4 In the list on the right, select the signal format. 5 Press [Set]. To clear the signal format setting Press [Clear]. 6 Press [Execute]. Setting the format converter conversion method You can set the format converter conversion method for each input. For details about the conversion method items and the target conversion formats, see "Setting the format converter conversion method" (page 447). 1 In the Engineering Setup >Switcher >Input >Input FC/ CCR menu (7332.1), press [FC Adjust]. The FC Adjust menu (7332.8) appears. 451