Sony XVS-7000 Users Guide - Page 231
Crop Settings, Cropping an image
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
• Selecting a DME channel using the override function allows you to assign both channels to keys. If either channel is selected on another key when using the override function, the assignment of both channels is canceled. • The combiner function cannot be used on the two DME channels assigned to a CG border. Setting a CG border The setting operations are performed using DME channel 1 or 3 only. Notes • The key assigned with the DME channel for the CG border must have clean mode enabled beforehand. • The following DME effects cannot be used on the DME channel (1 or 3) that sets the CG border. - Border - Crop - Flex Shadow - Defocus - Mosaic - Background • The CG border settings are saved separately in a snapshot and keyframe register for each DME channel. When recalling, it is necessary to recall the registers for the two channels at the same time. 1 Open the DME >Edge >Border/Crop menu (4111). 2 In the group, press [CG Border], turning it on. 3 In the group, press [Int Video Loc/Size], turning it on. 4 Set the position and size of the image to embed in the border using the following parameters. No. Parameter Adjustment 1 Location X Horizontal position 2 Location Y Vertical position 3 Size Size Note Canceling the DME channel assignment on a target key will disable the [Int Video Loc/Size] setting. Crop Settings Cropping an image 1 Open the DME >Edge >Border/Crop menu (4111). 2 Press [Crop], turning it on. 3 Set the following parameters. Parameter group [1/2] No. Parameter Adjustment 1 H Crop level on left and right sides 2 V Crop level on top and bottom sides 3 All Crop level on all sides Parameter group [2/2] No. Parameter Adjustment 1 Top 2 Left 3 Right Position of top crop Position of left crop Position of right crop 4 Bottom Position of bottom crop Signs of numeric settings For H, V, and All settings, it is not necessary to enter the sign (+/-). For example, in the case of an H setting, the value for Left is automatically converted to a negative value, and the value for Right to a positive value, to display the image. The following shows example input settings. Parameter Input Setting H 1.5 Left=-1.50 Right=1.50 -1.5 Left=-1.50 Right=1.50 4 To soften the edges of the image, press [Edge Soft], turning it on, and set the following parameter. No. Parameter Adjustment 1 Soft Edge softness Note Edges of an image cannot be softened when cropping is disabled. To select whether to also invert the crop area when inverting In the group, select one of the following. Crop −>Invert: Set an axis of symmetry at the center of the input video, and invert both the desired area of video and the crop area horizontally and vertically around that axis of symmetry. The order of effect application for the input image is Crop and then Invert. Invert −>Crop: Sets an axis of symmetry at the center of the input video, and inverts only the image horizontally and vertically around that axis of 231