Sony XVS-7000 Users Guide - Page 73
REMOTE connectors D-sub 9-pin, RS-422A, TALLY/GPI OUT connectors D-sub 37-pin
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
d UTIL (utility) connector (RJ-45, 1000BASE-T compliant) Use when controlling serial tally, GPI input/output, or external device via a network. e MVS (multi format video switcher) connector (RJ-45, 1000BASE-T compliant) Connect to a switcher control station via an Ethernet switch. f S-BUS connector (BNC-type) Connect a cable with BNC connector to an S-Bus data link via a T bridge. Connecting devices such as routing switchers and AUX bus remote panels via an S-Bus data link enables the following kinds of control. • Generation and return of tally information on the S-Bus, based on data received from other devices. • Switching of cross-points on a routing switcher from the control panel. • Switching of cross-points on a switcher from the remote panel. • Display of source names configured by a routing switcher on the control panel. g REMOTE connectors (D-sub 9-pin, RS-422A compliant) MKS-X2700: 1 to 6 connectors MKS-X7700: 1 to 6 connectors, 1 to 4 connectors Connect to a device controlled using Sony 9-pin VTR, VDCP (Video Disk Communications Protocol), Odetics protocol, or P-Bus (Peripheral II Protocol) protocols. h SERIAL TALLY 1 and 2 connectors (D-sub 9-pin, RS-422A compliant) Outputs tally information generated by the switcher control station of the XVS system. i TALLY/GPI OUT connectors (D-sub 37-pin) MKS-X2700: 1 to 36 connectors MKS-X7700: 1 to 54 connectors Outputs tally information generated by the switcher control station of the XVS system using a relay. It can also be used as a GPI output port. The output setting is controlled from the control panel of the XVS system. j TALLY/GPI IN connectors (D-sub 37-pin) MKS-X2700: 1 to 34 connectors MKS-X7700: 1 to 68 connectors Input a trigger signal as a GPI input. The input setting is controlled from the control panel of the XVS system. 73