Sony XVS-7000 Users Guide - Page 183
Color Backgrounds, Copy and Swap, and Other Settings, Color Backgrounds
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
8 Color Backgrounds, Copy and Swap, and Other Settings Chapter Color Backgrounds A color background is a function used to create color background video, using a color signal created by a dedicated generator. Color background selection There are two color backgrounds, color background 1 and color background 2, which you use by assigning to crosspoint buttons. Note In 4K format, color background 2 cannot be used. Color mix The color generators can output the result of combining two colors, which are color 1 and color 2. Using a pattern from a dedicated pattern generator, color 1 and color 2 can be combined in the boundary region, forming a color gradation. This is referred to as a "color mix." You can also apply modifiers to the selected pattern. When the "color mix" function is not used, the result is a flat color, and color 1 is always output. You carry out color background settings in the Color Bkgd menu. This section describes setting color background 1 as an example. Basic Color Background Setting Operations Making a single-color matte (flat color) If you are not using the "color mix" function to combine two colors, use the following procedure. 1 In the group of the Color Bkgd >Color Bkgd1 menu (2210), press [Flat Color], turning it on. 2 Set the following parameters. No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Hue Making a color combination (color mix) To combine color 1 and color 2, use the following procedure. 1 In the group of the Color Bkgd >Color Bkgd1 menu (2210), press [Mix Color], turning it on. 2 Set the following parameters. No. Parameter Adjustment 1 Size Pattern size 2 Soft Degree of softness of pattern edge 5 Pattern Pattern number a) a) The patterns are the same as standard wipe patterns 1 to 24. You can also make a pattern selection by pressing [Mix Pattern Select] in the Color Bkgd1 menu to display the Mix Ptn Select menu (2210.1). Press the desired pattern (1 to 24) to select it, and set the [Size] and [Soft] parameters. 3 Select [Color 1] and [Color 2], respectively, and set the colors. No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Hue 4 Set pattern modifiers, as required. When selecting [Position] and setting the pattern position No. Parameter Adjustment 1 Position H Horizontal position a) 183