Sony XVS-7000 Users Guide - Page 275

To adjust the density of the foreground You can adjust the density of the foreground image to be translucent so that the background shows through, making it easier to position the corners. Note This setting is not saved in a keyframe or snapshot. 1 In the Corner Pinning menu (4142), press [Video Through], turning it on. 2 Set the following parameter. No. Parameter Adjustment 4 Density Image density To adjust the zoom You can enlarge the image around the corner being adjusted, to allow fine positioning of the corner. Notes • This setting is not saved in a keyframe or snapshot. • This function is only enabled when combine is set. • When all four corners are being positioned, this function cannot be used. 1 In the Corner Pinning menu (4142), press [Zoom Enable], turning it on. 2 Set the following parameter. Global Effects Overview Global effects are special effects created by combining the images of successive channels. The Global Effect menu is used to add these effects. The following types of global effects are available. Effect Combiner Brick Description/Image Automatically combines the selected images when multiple channels are selected on one keyer or for one transition. Creates a cuboid using three successive channels. Shadow Gives the image a shadow. No. Parameter Adjustment 5 Zoom Degree of zooming in on the corners Note On the XVS-6000, global effects cannot be used when the signal format is 3840×2160P 2SI. Zoom disabled Combiner Settings When multiple channels (Ch) are selected on one keyer or for one transition, the Combiner automatically combines the selected images. Up to four channels can be combined. You can control the mix of images, and also the image overlap priority automatically. For a mix, you can control the relative amounts of each channel. Images can also cross in three dimensions. Zoom enabled 275