Sony XVS-7000 Users Guide - Page 353

Saving a Macro Always save the register after editing a macro. 1 In the numeric keypad control block, press the [MCRO] button. 2 Press the [STORE] button, turning it on. 3 Use the numeric keypad to enter the number (1 to 250) of the register in which you want to save. For details about selecting a register, see "Register selection in the numeric keypad control block" (page 305). 4 Press the [ENTER] button. The edited macro is saved in the register, and the [STORE STATS] button and [RCALL] button are lit amber. The display shows the saved register number. To cancel the saving of a macro While the [STORE STATS] button is lit amber, press and hold the [STORE STATS] button and press the [UNDO] button. Macro Operations (Flexi Pad Control Block) DEL button UNDO button MCRO button Bank selection buttons Memory recall section Flexi Pad control block Banks and registers To allow operations on the 250 registers, the Flexi Pad control block treats the registers in groups. These groups are called "banks." There are 26 banks, numbered 0 to 25. For details about the correspondence between banks and registers, see "Banks and Registers" (page 330). Recalling a Macro Register and Executing a Macro A macro operation is performed by recalling a macro register. The operation varies depending on the macro execution mode. Executing a macro in normal execution mode 1 In the Flexi Pad control block, press the [MCRO] button. 353