Sony XVS-7000 Users Guide - Page 162

4 In the group, press the button for the move destination, turning it on. The DME wipe pattern displayed on the screen moves to the position of the specified button. Moving the DME wipe pattern to a relative position In 2-channel mode, there are also patterns that can move to a relative position. 1 Open the M/E-1 >DME Wipe >Modify menu (1165). 2 In the group, select multiple target channels. 3 In the group, press [Position], turning it on. 4 Set the following parameters. No. Parameter Adjustment 4 Relative H Relative movement in the horizontal direction 5 Relative V Relative movement in the vertical direction Setting the DME wipe pattern size (Size) 1 Open the M/E-1 >DME Wipe >Modify menu (1165). 2 In the group, select the target channels. For a pattern in 1-channel mode: Select [1st Ch]. For a pattern in 2-channel mode: Select the corresponding channels. You can select more than one channel at the same time. 3 Press [Size], turning it on. 4 Set the following parameter. No. Parameter Adjustment 1 Size Effect size a) a) 100% indicates the unchanged size state. Display indications when multiple channels are selected at the same time The parameter setting value display shows the settings of the lowest-numbered channel. When you adjust the settings, this adjusts the settings on the other channels by the same amount. Adjusting the DME wipe pattern cropping (Crop) 1 Open the M/E-1 >DME Wipe >Modify menu (1165). 2 In the group, select the target channels. For a pattern in 1-channel mode: Select [1st Ch]. For a pattern in 2-channel mode or 3-channel mode: Select the corresponding channels. You can select more than one channel at the same time. For some patterns, the group selection is fixed and requires no setting. 3 In the group, press [Crop], turning it on. 4 Set the following parameters. Parameter group [1/2] No. Parameter Adjustment 1 H Crop the left and right of the image 2 V Crop the top and bottom of the image 3 All Crop the top, bottom, left, and right of the image Parameter group [2/2] No. Parameter Adjustment 1 Top Crop the top of the image 2 Left Crop the left of the image 3 Right Crop the right of the image 4 Bottom Crop the bottom of the image Display indications when multiple channels are selected at the same time The parameter setting value display shows the settings of the lowest-numbered channel. When you adjust the settings, this adjusts the settings on the other channels by the same amount. To crop to 4:3 aspect ratio in 16:9 mode In the group, press [4:3 Crop]. To set the action when a DME wipe crop transition is executed 1 Open the M/E-1 >DME Wipe >Modify menu (1165). 2 In the group, select the target channels. For a pattern in 1-channel mode: Select [1st Ch]. For a pattern in 2-channel mode or 3-channel mode: Select the corresponding channels. You can select more than one channel at the same time. 3 In the group, press [Crop], turning it on. 162