Sony XVS-7000 Users Guide - Page 260

Applying Special Effects (Lighting/Recursive Effects) Lighting Settings You can specify the intensity and color of the light and the lighting pattern. The following lighting patterns are available: Plane: Illumination of the entire screen. Bar: Bar illumination. You can specify the width and angle of the bar, and its softness. Preset: Lighting pattern suitable for nonlinear effects. When [Bar] is selected, the following modes can be selected. Normal: Emphasizes the bar highlight area. Specular: Creates an effect like light striking a surface with metallic reflections. Mat: Creates an effect like light striking paper, cloth, or another diffusively reflective surface. Note When the signal format is 3840×2160P 2SI or 1080P and the following nonlinear effects are used on one channel, the [Preset] setting of the lighting pattern is disabled. Page Turn, Roll, Cylinder, Sphere Applying the Lighting effect 1 Open the DME >Light/Trail >Lighting menu (4151). 2 Press [Lighting], turning it on. 3 In the group, select the lighting pattern (Plane, Bar or Preset). 4 Set the following parameters, according to the selected pattern. You can make the Lighting effect more effective by adjusting the [Total Ambient] parameter to lower the brightness of the entire image. The [Total Ambient] setting is common to the Spotlighting function. When [Plane] is selected No. Parameter Adjustment 1 Light Intensity of light in highlight area 5 Total Brightness of whole image Ambient When [Bar] is selected No. Parameter Adjustment 1 Light Intensity of light in highlight area 2 Ambient Intensity of light in ambient area 5 Total Brightness of whole image Ambient When [Preset] is selected No. Parameter Adjustment 1 Light Intensity of light in highlight area 2 Ambient Intensity of light in ambient area 3 Shade a) Intensity of light in shade area 5 Total Brightness of whole image Ambient a) Setting is available for Page Turn, Roll, Cylinder, and Sphere nonlinear effects. Shade area Highlight area Ambient area Setting the bar shape of the highlight area When [Bar] or [Preset] is selected in step 3 of "Applying the Lighting effect" (page 260), set the bar shape. 1 In the DME >Light/Trail >Lighting menu (4151), press [Light Modify]. 2 Set the following parameters. No. Parameter Adjustment 1 X X-value of bar center point 2 Y a) Y-value of bar center point 3 Angle a) Angle of bar 4 Width Width of bar 5 Soft Softness of boundary a) There are some nonlinear effects for which this cannot be set. 260