Sony XVS-7000 Users Guide - Page 31
Transition execution Independent key transition execution For details
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
For details about operation of external devices, see "Control of VTRs and Disk Recorders" (page 286). c Transition execution section This section is used to execute transitions and check the progress of the transition. d Independent key transition execution section This section executes independent key transitions. Independent key transition display section KEY5 ON to KEY8 ON buttons Transition indicator Fader lever Transition rate display CUT button AUTO TRANS button Name Fader lever Transition indicator Transition rate display AUTO TRANS (auto transition) button CUT button Description • Move this up or down to carry out the transition. • Press the [KF] button, turning it on, to enable the fader lever to be used as a keyframe fader. Displays the transition progress using LEDs. Displays the configured transition rate (the time from the beginning of a transition to its completion). • Executes an auto transition with the set transition rate and transition type. • During the transition, the button is lit amber. Executes an immediate transition. KEY1 ON to KEY4 ON buttons AUTO TRANS buttons Name Description Independent key transition display section Displays the following information for key 1 to key 8. Key material name (key source name when a key source is selected on the key bus of the cross-point control block), DME channel or resizer being used, transition rate, and transition type KEY1 ON to KEY8 ON buttons • Inserts or removes the key instantaneously. • If a key is currently inserted, the corresponding key button is lit amber. AUTO TRANS (auto transition) buttons • Inserts or removes the key automatically, for key 1 to key8, with the set transition rate and transition type. • During the transition, the button is lit amber. You can change the position of the key 1 to key 8 operation buttons in the Setup menu. However, the [AUTO TRANS] button is assigned with the [KEYx ON] (x = 1 to 8) button of the same key as a set. For details, see "Setting Transition Control Block Button Assignments" (page 410). 31