Sony XVS-7000 Users Guide - Page 313

Before deletion After deletion Deletion : Loop range Undoing an Edit Operation To undo a keyframe insert, modify, delete, or paste operation immediately after execution, press the [UNDO] button. Duration Mode Setting There are two keyframe duration modes: variable duration mode, and constant duration mode in which the effect duration is fixed (see page 297). • To select variable duration mode, press the [CONST DUR] button, turning it dark blue. • To select constant duration mode, press the [CONST DUR] button, turning it orange. reflected at both the transition start point and end point (see page 314). The operation is carried out according to DME wipe patterns 1202, 1203, or 1204. Frame in-out V (Frame I/O V): A type of frame in-out, which is specified when creating a transition effect in the vertical direction. The image movement is reflected at both the transition start point and end point (see page 314). Transition mode "Compress" The change in the image when the transition mode is set to "Compress" is as follows, in comparison to the case of "Picture-in-picture." Example of the image change in the transition mode "Picture-in-picture" (1-channel mode) Example of the image change in the transition mode "Compress" First stroke First stroke Transition Mode Settings for User Programmable DME To create an effect for user programmable DME, it is necessary to set the transition mode. Second stroke Second stroke User programmable DME transition mode For the transition mode set when creating a keyframe effect for a user programmable DME pattern, the following can be used. Single: Single transition mode Flip tumble (Flip Tumble): Flip tumble transition mode Dual: Dual transition mode Picture-in-picture (P in P): 1-channel and 2-channel picture-in-picture transition mode Compress: A type of picture-in-picture, in which the new image is the background, and the currently visible image shrinks, and then expands to its original size (see page 313). Frame in-out (Frame I/O): 1-channel or 2-channel, frame in-out transition mode. When the first transition completes, if you move the position of the image, you can move it both horizontally and vertically (see page 313). Frame in-out H (Frame I/O H): A type of frame in-out, which is specified when creating a transition effect in the horizontal direction. The image movement is Transition mode "Frame in-out" In this mode, when the first transition has completed, you can move the image with the positioner in both horizontal and vertical directions, but the image position at the transition start point and end point does not change. The description is of an example of creating an effect such as the following. 313