Sony XVS-7000 Users Guide - Page 412
Inhibiting DME Channel Selection, Operations, Inhibiting Operation on the Key, Control Block, Enable
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 412 highlights
1 In the Engineering Setup >Panel >Config menu (7321), press [Operation Inhibit]. The Operation Inhibit menu (7321.26) appears. 2 Press [M/E Operation Inhibit]. The M/E Operation Inhibit menu (7321.18) appears. 3 Select the target bank to set. 4 In the group, select the utility 2 bus (Util2 Bus) or key button (Key1 to Key8) for which operations are to be inhibited. Note The button/indicator/display status settings are common to all modules. Inhibiting DME Channel Selection Operations You can inhibit DME channel selection operations in the device control block (trackball). 1 In the Engineering Setup >Panel >Config menu (7321), press [Operation Inhibit]. The Operation Inhibit menu (7321.26) appears. 2 Press [Trackball Module]. The Trackball Module menu (7321.27) appears. 3 Select the DME channel for which to inhibit operation. 4 Press [Inhibit]. Inhibiting Operation on the Key Control Block You can set to inhibit operations for each module in the key control block. 1 In the Engineering Setup >Panel >Config menu (7321), press [Operation Inhibit]. The Operation Inhibit menu (7321.26) appears. 2 In the group, select the target module to set (1st to 4th). To select a button/indicator/display state when operation is inhibited In the group, select one of the following. Enable: Buttons/indicators turn on and displays appear according to the current setting status. Disable: Buttons/indicators turn off and displays do not appear. 412