Sony XVS-7000 Users Guide - Page 280

Applying a Drop Shadow Depending on the combiner channel selection, the buttons that can be used varies as follows. Combiner Button channel selection Ch1 Ch2 Ch3 Ch1+ Shadow Shadow Shadow Ch2 Ch2+ Ch3 Shadow Shadow Ch1+Ch2 Valid Ch2+Ch3 Valid Ch3+Ch4 Valid Ch1+Ch2+ Valid Ch3 Valid Valid Ch2+Ch3+ Ch4 Valid Valid Valid Ch1+Ch2+ Valid Ch3+Ch4 Valid Valid Valid This section describes adding a drop shadow using Ch1 and Ch2 as an example. 1 Open the Global Effect >Ch1-Ch4 >Shadow menu (4213). 2 Press [Ch1 Shadow], turning it on. Drop Shadow is enabled, and channel 2 becomes the channel for the shadow to the image. You can adjust the position and density of the shadow. To combine images after applying a shadow Select Ch1+Ch2 and Ch3+Ch4 using the combiner, then in the Global Effect >Ch1-Ch4 >Shadow menu (4213), select [Ch1 Shadow] and [Ch3 Shadow]. To apply a shadow after combining images Select Ch1+Ch2+Ch3+Ch4 using the combiner, then in the Global Effect >Ch1-Ch4 >Shadow menu (4213), select [Ch1+Ch2 Shadow]. Note The flex shadow function cannot be enabled when Drop Shadow is enabled. 3 Set the following parameters. No. Parameter Adjustment 1 Position H Horizontal shadow position 2 Position V Vertical shadow position 3 Density Density of shadow 4 In the group, select the shadow signal. Video: Select Ch2 video input as the shadow. Flat Color: Select a single color matte as the shadow. 5 When [Flat Color] is selected in step 4, set the following parameters. No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Hue 280