Sony XVS-7000 Users Guide - Page 153

The wipe pattern image and pattern number are displayed on buttons for registers with a registered snapshot. You can also set to display the register name instead of the pattern number in the Setup menu (see page 430). 2 Press the memory recall button for the register with the wipe snapshot you want to delete. Notes • The menu settings of the memory recall buttons are linked to the Flexi Pad control block. • When both the main pattern and sub pattern are selected for a pattern mix, the main pattern image and number are displayed. Selecting a wipe pattern 1 In the M/E-1 >Wipe >Wipe Snapshot menu (1157), press the [Pattern No] memory recall button. 2 Use the numeric keypad window to enter the pattern number consisting of up to three digits, and press [Enter]. The entry is applied, and the selected wipe pattern image and pattern number are displayed in the "Current Pattern No" field on the top left. Saving a wipe snapshot 1 Configure the wipe you want to save. 2 In the M/E-1 >Wipe >Wipe Snapshot menu (1157), press [Store], turning it on. 3 Press the memory recall button for the register you want to save. The selected button is lit orange, and the set wipe pattern image and number are displayed. Note If you press a button in which a wipe snapshot is already saved, the existing contents of the register will be overwritten. Recalling a wipe snapshot In the M/E-1 >Wipe >Wipe Snapshot menu (1157), press the memory recall button for the register with the wipe snapshot you want to recall. The selected button is lit orange, and the wipe snapshot is recalled. Deleting a wipe snapshot 1 In the M/E-1 >Wipe >Wipe Snapshot menu (1157), press [Delete], turning it on. 153