Sony XVS-7000 Users Guide - Page 270
To set Surface Flat, To change the light to a ring shape
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
To set a test sphere 1 In the Light 1 menu (4156.3), press [Test Sphere], turning it on. A test sphere effect appears on the surface of the image. 2 Set the following parameter. No. Parameter Adjustment 5 Amp Light separation distance a) a) Light appears from Z direction. -100.00 indicates light that is furthest away, and +100.00 indicates light that is closest. 0.00 indicates the whole image is lit like a flat effect. To set the illuminated area In the group of the Light 1 menu (4156.3), select one of the following. FRGD: The light strikes the image foreground. BKGD: The light strikes the image background. Both: The light strikes both the image foreground and background. For details about the illuminated area, see "Selecting the illuminated area" (page 267). Notes • When [Multiply] is selected in the group of the Light Color Adjust menu (4156.4) (see page 271), the lighting effect is not applied to the background, even if [BKGD] or [Both] is selected. • When [Brilliancy] is set to 100.0 in the group of the Light Color Adjust menu (4156.4) (see page 271), the lighting effect is not applied to the background, even if [BKGD] or [Both] is selected. • When the global effect combiner is set to [Mix] or [Depth], the lighting effect is not applied to the background, even if [BKGD] or [Both] is selected. To set Surface Flat In the Light 1 menu (4156.3), press [Surface Flat], turning it on. When [Non Linear] is selected in the group of the Spot Lighting menu (4156), only the part of the surface being illuminated by light from the currently set light source has the state as if [Flat] had been selected. To set the shape of the lighting 1 In the Light 1 menu (4156.3), press [Shape], turning it on. 2 Set the following parameters. No. Parameter Adjustment 1 Shape Ptn Shape pattern a) 2 Size Shape size 3 Deform Amount of shape deformation b) 4 Soft 5 Angle Softness of shape pattern Angle of shape pattern rotation c) a) See page 267. b) 0 is a round shape, and 100 is the shape of the pattern. Smaller values make the pattern more rounded. c) -1.00 is one rotation in the counterclockwise direction. +1.00 is one rotation in the clockwise direction. To rotate the shape pattern 1 In the Light 1 menu (4156.3), press [Shape Speed], turning it on. When [Shape] is selected, the display of the 5th parameter changes. 2 Set the following parameters. No. Parameter Adjustment 5 Speed Rotation speed and direction a) a) -100.00 is four rotations per second in the counterclockwise direction, and +100.00 is four rotations per second in the clockwise direction. 0.00 stops the rotation. To change the light to a ring shape Note When [Parallel] or [Whole] is selected in the group, the Ring parameter cannot be set if Shape is disabled. 1 In the Light 1 menu (4156.3), press [Ring]. 2 Set the following parameters. No. Parameter Adjustment 1 Offset Offset from center position (radius) 2 Radius Radius of ring 3 Angle Rotation angle of ring a) a) -1.00 is one rotation in the counterclockwise direction. +1.00 is one rotation in the clockwise direction. Note There is no [Radius] parameter setting when [Line] is selected in the group. 270