Sony XVS-7000 Users Guide - Page 89

Transition Type Selection For details about selecting the transition type on the transition control block, see "Basic Operation for Transitions" (page 84). Setting the Transition Type (Menu) You can select the transition type in the Misc >Transition menu for each switcher bank. This section describes setting the transition type on the M/E-1 bank as an example. 1 Open the M/E-1 >Misc >Transition menu (1171). 2 Select the transition type in the group. Make the required settings, according to the selected transition type. • Super mix settings (see page 89) • Preset color mix settings (see page 89) Note When multi-program mode is selected, there may be cases in which two or more transition types have been selected. Also, in place of a color matte you can use an image selected on the utility 2 bus. Note In multi-program mode, you can use a preset color mix only when selecting the background for the next transition. One-stroke mode This mode performs a preset color mix in a single transition. When bus fixed mode is selected in the Setup menu, a preset color mix is always carried out in one-stroke mode. One-time mode This mode switches to the previous transition type automatically when a preset color mix is completed. When only the background is changed Current video Super Mix Settings You can set the output levels of the current and new video signals at the mid-point of the transition, in the range 0 to 100%. 1 Open the M/E-1 >Misc >Transition menu (1171). 2 Select [Super Mix] in the group. 3 Set the following parameters. No. Parameter Adjustment 2 A Gain Background A output level 3 B Gain Background B output level Color matte New video Preset Color Mix Settings You can specify the color for the color matte inserted in a preset color mix by adjusting the luminance, saturation, and hue values. 89