Sony XVS-7000 Users Guide - Page 151
Wipe Snapshots, Wipe Snapshot Operations Flexi, Pad Control Block
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
When [Angle] is selected No. Parameter Adjustment 1 Angle Rotation angle of pattern a) a) See page 146. When [Speed] is selected No. Parameter Adjustment 1 Speed Rotation speed of pattern a) a) See page 146. When [Magnitude] is selected No. Parameter Adjustment 1 Angle Angle of pattern at start of transition a) 2 Magnitude Amount of rotation through course of transition a) a) See page 146. Setting the aspect ratio of a wipe pattern (Aspect) 1 In the M/E-1 >Key1 >Transition/Video Process >Wipe Adjust menu (1117.1), press [Aspect], turning it on. 2 Set the following parameter. Wipe Snapshots You can save a snapshot of a wipe pattern together with all modifiers and pattern limit settings in a dedicated register for recall when required. There are ten wipe snapshot registers on each switcher bank. Use the Flexi Pad control block in each switcher bank or the menu to save and recall wipe snapshots. Wipe Snapshot Operations (Flexi Pad Control Block) Pressing the [WIPE] button in the Flexi Pad control block switches the memory recall section to wipe snapshot operation mode for saving, recalling, and deleting wipe snapshots. This section describes operation of wipe snapshots on the M/E-1 bank as an example. WIPE button UNDO button Wipe pattern number DEL button No. Parameter Adjustment 1 Aspect Aspect ratio a) a) See page 146. Replicating a wipe pattern (Multi) 1 In the M/E-1 >Key1 >Transition/Video Process >Wipe Adjust menu (1117.1), press [Multi], turning it on. 2 Set the following parameters. No. Parameter Adjustment 1 H Multi Number of repetitions of pattern horizontally 2 V Multi Number of repetitions of pattern vertically 3 Invert Type Pattern layout a) a) See page 147. Memory recall section Flexi Pad control block Button display in the memory recall section You press buttons in the memory recall section to select registers (1 to 10). The wipe pattern image is displayed on buttons for registers with a registered snapshot. You can also rename the register in the Setup menu (see page 430). The wipe pattern number is displayed on the top right button in the memory recall section. 151