Sony XVS-7000 Users Guide - Page 285

3 Select the trigger pulse output destination. To select the GPI output port of the SIU, select "2" (DCU). 4 Set the port number. For details, see "Setting the first keyframe when rewind is executed" (page 429). No. Parameter Adjustment 3 DCU Port SIU GPI output port number No Note For the output port you have set here, be sure to set the trigger type to "Rising Edge," "Falling Edge," or "Any Edge." For details, see "Configuring GPI Outputs" (page 477). 5 Press [Set]. To set other GPI timeline ports, repeat steps 1 to 5. To test trigger output Press [Test Fire]. This outputs a pulse from the selected GPI output port. Clearing port settings 1 In the Device >GPI Timeline >GPI Timeline menu (5311), select the GPI timeline port for which you want to clear the setting. 2 In the list on the right, select "1" (Off). 3 Press [Set]. To clear the settings for all ports Press [All Off]. Setting the action for a rewind operation On the GPI timeline, when the [REWIND] button in the utility/shotbox control block is pressed the action set for the first keyframe is not executed; when the [RUN] button is pressed, then the first keyframe action is executed. To execute an action when the [REWIND] button is pressed, it is necessary to set this action (Rewind Action). To set the Rewind Action, press [Rewind Action] in the Device >GPI Timeline >GPI Timeline menu (5311) to open the Rewind Action menu (5311.1). Operate in the same way as in the GPI Timeline menu (5311), and press [Rewind Action Set] to carry out the setting. Alternatively, you can make settings in the Setup menu so that when the [REWIND] button is pressed, this executes the action set for the first keyframe, and when the [RUN] button is pressed the first keyframe action is not executed. In this case, the Rewind Action setting is still valid. 285