Sony XVS-7000 Users Guide - Page 138
Key Snapshots, Key Snapshot Operations Flexi Pad, Control Block
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Key Snapshots Key settings, other than the key on/off status and the key priority, can all be instantaneously saved in a dedicated register and recalled when required. A key snapshot comprises three values: a cross-point button number, key memory full mode, and independent key transition, and can be recalled in any combination. There are four key snapshot registers for each keyer. You perform key snapshot operations in the Flexi Pad control block or key fader control block. Key Snapshot Operations (Flexi Pad Control Block) Pressing the [KEY] button in the Flexi Pad control block switches the memory recall section to key operation mode for saving and recalling key snapshots. This section describes operation of key snapshots on key 1 on the M/E-1 bank as an example. KEY button Key 1 to 8 delegation buttons Register 1 to 4 selection buttons The register name is displayed on buttons for registers with a registered snapshot. The button color varies as follows, according to the register state. Gray characters on black: Register not containing a saved snapshot White characters on dark blue: Register containing a saved snapshot Lit orange: Last recalled register Saving a key snapshot 1 In the M/E-1 bank Flexi Pad control block, press the [KEY] button. This switches the memory recall section to key operation mode. 2 Press the [KEY1] button in the memory recall section. 3 While pressing the [KEY] button, press the button for the register you want to save. The selected button is lit orange, and the key snapshot is saved. Note If you press a button in which a key snapshot is already saved, the existing contents of the register will be overwritten. Memory recall section Recalling a key snapshot 1 In the M/E-1 bank Flexi Pad control block, press the [KEY] button. This switches the memory recall section to key operation mode. 2 Press the [KEY1] button in the memory recall section. 3 Press the button for the register you want to recall. The selected button is lit orange, and the key snapshot is recalled. The recalled information varies depending on the settings in the Snapshot >Key Snapshot >Attribute menu (6351) (see page 334). Flexi Pad control block Button display in the memory recall section You press buttons in the memory recall section to select registers (1 to 4). 138