Sony XVS-7000 Users Guide - Page 36

Button name BANK SEL (bank select) Description Switches the memory recall section to numeric keypad mode for entering bank numbers. Enter a bank number and press the [ENTER] button to switch the memory recall section to the register display for the selected bank. Key Control Block The key control block is used to adjust and modify keys. a Delegation buttons b DME channel selection buttons c ON AIR indicators d Setting buttons e Function buttons f Display g Adjustment knobs a Delegation buttons These select the bank (M/E and PGM/PST) and keyer to assign to the key control block. Button name M/E1 to M/E5, P/P KEY1 to KEY8 Description Assigns M/E-1 to M/E-5 banks and PGM/PST bank. • Assigns key 1 to key 8. • Press and hold a [KEY1] to [KEY8] button and press an [M/E1] to [M/E5] or [P/P] button to return the settings of the selected key to the defaults. Button name TRANS (transition) SUB TRANS (sub transition) Description • Used to check the DME channel used for DME wipes on the M/E or PGM/PST bank. • You can select the DME channel to be used beforehand when a DME wipe is selected as the transition type. • Press and hold the [TRANS] button and press a [KEY1] to [KEY8] button to enable independent key transition operation. In Multi Program 2 mode, used as the [TRANS] button on the sub side. For details about Multi Program 2 mode, see "Multi Program 2" (page 199). 36