Sony XVS-7000 Users Guide - Page 279

Combinations of Ch2, Ch3, and Ch4 Upper side: Ch2 image Side V: Ch3 image Side H: Ch4 image You can adjust the height of the brick, the overlap between the three images, and the way to insert the side images. Creating a Brick 1 Open the Global Effect >Ch1-Ch4 >Brick menu (4212). 2 Press [Brick], turning it on. The Brick effect is enabled, and a cuboid (brick) showing the images of three channels appears. Adjust parameters for the height of the brick and the overlap between the three images. Notes • When Brick is enabled, the Z-axis position of the Front image in source space is shifted by 1/2 the height, magnifying the image slightly. • The flex shadow function cannot be enabled when Brick is enabled. 3 Set the following parameters. No. Parameter Adjustment 1 Height Height of brick 2 Front Front overlap Overlap 3 Side H Side H overlap Overlap 4 Side V Side V overlap Overlap 4 Select how to insert the image for the side view with changed value for Height in for Side V and in for Side H. Crop: Crop the parts that do not fit into the side without shrinking the picture. You can set the following parameters. No. Parameter Adjustment 1 H Position of left crop 2 V Position of top crop 3 Rotation Angle of rotation, when rotated around the Z-axis of source space The set position becomes the upper left corner of Side V or Side H. The right and bottom sides of the inserted image are set automatically. Compress: Images are inserted after being reduced. You can set the following parameters. No. Parameter Adjustment 1 Top Position of top crop 2 Left Position of left crop 3 Right Position of right crop 4 Bottom Position of bottom crop 5 Rotation Angle of rotation, when rotated around the Z-axis in source space The parts of the image defined by Top, Left, Right, and Bottom are magnified or shrunk to fit into Side V or Side H. To invert the image in a side view For example, to invert the image on the front of Side H, press the following buttons in the group, turning them on. Invert H: Invert horizontally. Invert V: Invert vertically. For the images on the other sides, use a similar operation in the following groups: • Back image of Side H: group • Front image of Side V: group • Back image of Side V: group Actual size, upper left corner Top side Magnified or shrunk to fit Side H Side V Crop Set automatically Cropped region Compress Shadow Settings This effect uses two successive channels (Ch). You can adjust the position and density of the shadow with respect to the image, and the color of the shadow. The channel with the largest number (for example, Ch2 in the case of Ch1 and Ch2) becomes the shadow. Note When the combiner function is disabled, the shadow function cannot be used. 279