Sony XVS-7000 Users Guide - Page 132
Rotation Settings, Virtual Image Cancelation, Crop/Border Settings, Setting cropping menu
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
To clear all of the parameters in the work buffer and reset the resizer, press the [CLR WORK BUFR] button twice in rapid succession. For the default state, you can select either the factory default settings or user settings. For details, see "Power-On (Startup) State Selection" (page 397). To reset the bank to the default state Press the [M/E DEF RCALL] button twice in rapid succession to return the currently selected bank (M/E or PGM/PST) to the default state. Rotation Settings Note Select either X or Y direction for rotation. You cannot make rotation by combining both directions. 1 In the M/E-1 >Key1 >Resizer menu (1115), press [Resizer], turning it on. 2 In the group, press [Rotation]. The Rotation menu (1115.5) appears. 3 In the group, select the direction of rotation. X: Horizontal rotation Y: Vertical rotation 4 Set the following parameters. When [X] is selected No. Parameter Adjustment 1 Rotation X Horizontal key rotation 4 Perspective Perspective When [Y] is selected No. Parameter Adjustment 2 Rotation Y Vertical key rotation 4 Perspective Perspective Virtual Image Cancelation If an extreme degree of perspective is set for an image, the part of the image exceeding the virtual view point is displayed wrapped around on the monitor screen. This is referred to as a virtual image. You can make a setting so as not to show the virtual images. 1 In the M/E-1 >Key1 >Resizer menu (1115), press [Resizer], turning it on. 2 In the group, press [Rotation]. The Rotation menu (1115.5) appears. 3 Press [Wrap Around], turning it on. Interpolation Settings 1 In the M/E-1 >Key1 >Resizer menu (1115), press [Resizer], turning it on. 2 In the group, press [Resizer Process]. The Resizer Process menu (1115.3) appears. 3 Select an interpolation method. Set the interpolation settings in the same way as for the DME interpolation settings. For details, see "Interpolation Settings" (page 273). Crop/Border Settings Setting cropping (menu) 1 In the M/E-1 >Key1 >Resizer menu (1115), press [Resizer], turning it on. 2 In the group, press [Border/ Crop]. The Border/Crop menu (1115.1) appears. 3 Press [Crop], turning it on. 4 Set the parameters. Set the crop settings in the same way as for the DME crop settings. For details, see "Crop Settings" (page 231). Note Enabling mosaic or defocus in the M/E-1 >Key1 >Resizer >Enhanced Effect menu (1115.2) and selecting [Video/ Key] in the group disables cropping. 132