Sony XVS-7000 Users Guide - Page 205

Functions Added in Multi Program 2 Mode • You can set the video process for the utility 3 bus signal. • "Sub Cut" and "Sub Auto Trans" on each switcher bank are added to the selectable actions in the SIU (DCU function) GPI input settings. • "Main&Sub" and "Sub" are added to the macro event configuration parameters and macro attachment settings. • "Sub Program," "Sub Preset," and "Sub Trans PGM" on each switcher bank are added to the link source bus for cross-point button link settings. • Snapshot attributes can be set independently for main and sub. • Menus for the sub bank are added to menus that can be recalled by pressing a button twice. • [MP2 Auto Correct] settings are available in the Effect menu or Snapshot menu. For example, enabling this determines whether the copy destination and copy source data is the main bank or sub bank, and automatically switches the data. • The [SUB TRANS] button on the key control block is enabled. This functions as the [TRANS] button for the sub bank. • You can display whether key 1 to key 8 are assigned to the main bank or the sub bank in the display of the transition control block. • On the cross-point pad of the cross-point control block, cross-point hold of the utility 3 bus can be set. Also, main and sub information is displayed on the switcher bank display buttons. • The [MAIN] button and [SUB] button are enabled on the transition control block and transition control block (simple type). Differences Between Multi Program 2 Mode and Standard Mode The differences from operation in standard mode are as follows. Item Keys a) Wipes (background) Wipes (keys) DME wipes Transitions Patterns Modifiers Patterns Modifiers Use Patterns for 1 channel Patterns for 2 channels Patterns for 3 channels Backgrounds Modifiers Key priority Transition preview Preset color mix Main Sub Key 1 to key 8 can be used Key 2 to key 8 only can be used Same as standard mode • Only standard wipe patterns can be used • Pattern mix cannot be used Same as standard mode • Split, pairing, modulation, spring, and spiral cannot be used • Edge fill mattes are single color only • Four types of multi replication are available for selection. • Only standard wipe patterns can be used • Pattern mix cannot be used • Split, pairing, modulation, spring, and spiral cannot be used • Edge fill mattes are single color only • Four types of multi replication are available for selection. Supported Cannot be used (Can be used, with a setting change) Main and sub can be used separately. Only one of main and sub can be used. For each M/E, the number of DMEs that can be used is the same as in standard mode. Wipe edge fill matte (including Wipe edge fill matte (single color only) color mix and other settings in the Matte Adjust menu) Same as standard mode Wipe border colors are single color only Not supported Not supported Color matte or video signal selected on the utility 2 bus Color matte only 205