Sony XVS-7000 Users Guide - Page 554

Icon Message Change Password Failed. The password was not changed. Couple Cannot couple while playing back or locking is in progress. Coupling has been canceled. Duration of two files are different. Error This operation is canceled, because the register is locked. Please change the register status to be unlocked first. The file was not able to be read. It was not possible to make a file. "Source" and "Target" are the same directory. Please change the "Source" or the "Target" directory. The Source and the target are the same directory. Please change the source or the target directory. It failed. Please confirm the server address. Invalid IP address. File Frame Memory Some requests are skipped. Following operation is not permitted. - Loading that will cause duplicate register name. File Open Status ERROR (01) ERROR (02) ERROR (FF): No target device has been assigned Description 7317.1: Engineering Setup >System >Maintenance >Setup Operation Lock 7317.2: Engineering Setup >System >Maintenance >File Load Lock The password could not be changed. 2124: Frame Memory >File >Pair Recombination Pair file cannot be created because the target file is being played back or is locked (see page 180). 2124: Frame Memory >File >Pair Recombination Pair file cannot be created because the durations of the two target files are different. 6211.1: Effect >Master Timeline >Store >Edit 6311.1: Snapshot >Master Snapshot >Store >Edit 6411.1: Shotbox >Register >Store/Recall >Edit 6411.2: Shotbox >Register >Store/Recall >Key Snapshot Edit When [Store] was pressed, the target register was locked. Unlock the register before executing [Store]. 7142.1: File >Shotbox, Macro >Macro >File Edit When [Off Line Edit] was pressed, the selected file could not be read. Select the file again, and press [Off Line Edit] once more. 7142.3: File >Shotbox, Macro >Macro >File Edit >Off Line Edit The file could not be written when saving. Try to save once more. 7161: File >All, External File >All The same directory was selected for source and target. Select different directories. 7172: File >Configure >Unit ID Copy The same directory and ID were selected for source and target. Select different directories and IDs. 7311: Engineering Setup >System >Network Config An incorrect server address was entered. Enter the correct server address. 7311.2: Engineering Setup >System >Network Config >IP Address 7311.7: Engineering Setup >System >Network Config >NMOS 7355.1: Engineering Setup >DCU >Serial/Net Port Assign >P-Bus Setting 7355.8: Engineering Setup >DCU >Serial/Net Port Assign >AMP Setting 7355.9: Engineering Setup >DCU >Serial/Net Port Assign >General tcp/ip Setting An incorrect IP address was entered. Enter the correct IP address. 7151: File >Frame Memory >Frame Memory A file with the same name already exists in storage when loading a file. 533X: Device >DDR/VTR An error was returned from the DDR/VTR, and one of the messages on the left appears, depending on the error number. Check the device settings in menu 7355 (Engineering Setup >DCU >Serial/ Net Port Assign) or menu 7325.4 (Engineering Setup >Panel >Device Interface >Device Assign). 554