Sony XVS-7000 Users Guide - Page 329
Recalling a snapshot, To cancel a snapshot save operation
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 329 highlights
M/E1 to M/E5, P/P, USER1 to USER8, DME1 to DME4, RTR, ALL For details about region selection, see "Region selection in the numeric keypad control block" (page 305). For details about saving a master snapshot, see "Creating and saving a master snapshot" (page 330). The display shows the selected region name and the last recalled register number. 4 Press the [STORE] button, turning it on. 5 Use the numeric keypad to enter the number of the register in which you want to save. The display shows the selected register number. For details about selecting a register, see "Register selection in the numeric keypad control block" (page 305). Note If you press a button in which a snapshot is already saved, the existing contents of the register will be overwritten. 6 To add attributes (see page 327), press the following buttons, turning them on. Attribute Effect dissolve Auto transition Button [EFF DISS] button [AUTO TRANS] button Note In the numeric keypad control block, it is not possible to add the cross-point hold attribute. When adding attributes, use the menu (see page 333). 7 Press the [ENTER] button. This saves the snapshot in the specified register. The [RCALL] button and the [STORE STATS] button light amber. To cancel a snapshot save operation While the [STORE STATS] button is lit amber, press and hold the [STORE STATS] button and press the [UNDO] button. Recalling a snapshot 1 In the numeric keypad control block, press the [SNAPSHOT] button. The control block switches to snapshot operation mode, and the [SNAPSHOT] button and [RCALL] button light amber. 2 Use the region selection buttons to select the target region of the operation. You can select more than one button. The following region selection buttons can be operated for snapshots. M/E1 to M/E5, P/P, USER1 to USER8, DME1 to DME4, RTR, ALL, MASTR For details about region selection, see "Region selection in the numeric keypad control block" (page 305). 3 Use the numeric keypad buttons to enter the register number to be recalled. The display shows the selected register number. For details about selecting a register, see "Register selection in the numeric keypad control block" (page 305). 4 To add temporary attributes (see page 327), press the following buttons, turning them on. Control block Crosspoint control block Numeric keypad control block Temporary attribute A/B bus crosspoint hold Key cross-point hold Key disable Effect dissolve Auto transition Button [XPTHLD A] and [XPTHLD B] buttons of the cross-point pad [XPTHLD KEY1] to [XPTHLD KEY8] buttons of the cross-point pad a) [XPTHLD KEY1] to [XPTHLD KEY8] buttons of the cross-point pad b) [EFF DISS] button [AUTO TRANS] button a) When the operation mode is set to [Xpt Hold] in the Setup menu. b) When the operation mode is set to [Key Disable] or [Key Dsbl with Status] in the Setup menu. For details about operation modes, see "Setting the operation mode of a cross-point hold button on the key bus" (page 468). Notes • The cross-point hold and key disable settings are maintained until you next press and release the cross-point hold button. • Adding a temporary attribute does not affect the attribute settings saved in registers. 329