Sony XVS-7000 Users Guide - Page 246

2 Press [Glow], turning it on. Note The key border function and glow function cannot be enabled at the same time. The most recently set function is enabled. 3 Set the following parameters. No. Parameter Adjustment 1 Clip Reference level for highlight detection 2 Gain Gain level for highlights 3 Soft Softness 4 Press [Matte] and set the glow color. No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Hue To invert the highlight areas Press [Glow Invert], turning it on. The highlight and non-highlight areas are inverted. To mask the Glow effect with a selected pattern Press [Mask] to open the DME >Video Modify >Mask menu (4127), and set the type of pattern and modifiers (see page 246). Note When the signal format is 1080P, masking will cause the edges to become blurred. Mask Settings Applying the Mask effect 1 Open the DME >Video Modify >Mask menu (4127). 2 In the group, select the effect group you want to apply the mask. Effect Gp1: Posterization, Solarization, Nega, Sepia, Mono, Contrast, Mosaic, Sketch, Metal Effect Gp2: Defocus, Blur, Glow 3 Press [Position/Size]. 4 Set the following parameters. No. Parameter Adjustment 1 H Horizontal position 2 V Vertical position 3 Size Size of mask 4 Soft Softness of mask 5 Pattern Pattern number a) a) Pattern numbers 21, 24, and 304 5 To invert the mask source, press [Invert], turning it on. 6 Set the modifiers for the mask pattern as required. When selecting [Aspect] and adjusting the pattern aspect ratio No. Parameter Adjustment 1 Aspect Aspect ratio a) a) When a minus value is specified, the picture is extended in the vertical direction. When a plus value is specified, the picture is extended in the horizontal direction. When selecting [Angle] in the group and slanting the pattern No. Parameter Adjustment 1 Angle Rotation angle of pattern a) a) -1.00 is one rotation in the counterclockwise direction. +1.00 is one rotation in the clockwise direction. 0.00 is no rotation. When selecting [Speed] in the group and rotating the pattern at a constant speed No. Parameter Adjustment 1 Speed Rotation speed of pattern a) a) -100.00 is four rotations per second in counterclockwise direction. +100.00 is four rotations per second in clockwise direction. 0.00 is in stationary state. Notes on applying a mask effect with a DME If [Effect Gp1] and [Effect Gp2] are simultaneously enabled in the group of the DME >Video Modify >Mask menu (4127), then the border or beveled edge is also masked. The following describes masking using a round pattern as an example. 246