Sony XVS-7000 Users Guide - Page 34
Flexi Pad Control Block, Independent key transition display KEY ON buttons
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
a Independent key transition display section b KEY ON buttons b KEY ON buttons c AUTO TRANS buttons a Independent key transition display section The following information is displayed for the assigned key on the [KEY ON] buttons. • Key material name (key source name when a key source is selected on the key bus of the cross-point control block) • DME channel or resizer being used • Transition rate • Transition type b KEY ON buttons Inserts or removes the key assigned to the button instantaneously. If a key is currently inserted, the corresponding key button is lit. You can assign a key (KEY1 to KEY8) of any switcher bank (M/E-1 to M/E-5, PGM/PST) to the [KEY ON] buttons in the Setup menu. For details, see "Setting Independent Key Transition Control Block Button Assignments" (page 410). c AUTO TRANS (auto transition) buttons Inserts or removes the key assigned to the [KEY ON] button with the set transition rate and transition type automatically. During the execution of the transition, the button is lit. Flexi Pad Control Block You use the Flexi Pad control block for recalling and saving snapshots, wipe snapshots, DME wipe snapshots, and key snapshots, for recalling and creating macros, for recalling and executing shotboxes and master timelines, for entering the transition rate, and for other tasks. a Mode selection buttons c UNDO button/ DEL button d Bank selection buttons b Memory recall section 34