Sony XVS-7000 Users Guide - Page 247
Freeze Settings, Freezing using Hard Freeze, Freezing using Time Strobe, Freezing using Film
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 247 highlights
Image 1: Image before applying mask Border or beveled edge Image with "Mono" and "Defocus" applied m Image 2: State with [Effect Gp1] only enabled Portion 2 has "Mono" masked, and "Defocus" only applied. Portion 1 has both "Mono" and "Defocus" applied. m If [Effect Gp2] is enabled from image 2, then the mask should be applied to portion 2 only, but in fact the border or beveled edge is also masked. Image 3: State with [Effect Gp1] and [Effect Gp2] enabled The border or beveled edge effect is also masked. Freeze Settings The following types of effect are available to freeze the input video. Hard Freeze: Freezes the input video and pauses at an arbitrary position. Time Strobe: Freezes the input video and pauses at specified intervals and duration. Film: Frame advance effect like in movie films. You can specify the frame advance rate. Freezing using Hard Freeze 1 Open the DME >Freeze >Freeze menu (4131). 2 In the group, select the freeze timing. Frame: Freeze the signal using frame units. Field1: Freeze the first field of the signal. Note When the signal format is 3840×2160P 2SI, 1080P, 1080PsF, or 720P, the freeze timing cannot be specified. 3 In the group, press [Hard Freeze], turning it on. Freezing using Time Strobe 1 Open the DME >Freeze >Freeze menu (4131). 2 In the group, select the freeze timing. Frame: Freeze the signal using frame units. Field1: Freeze the first field of the signal. Note When the signal format is 3840×2160P 2SI, 1080P, 1080PsF, or 720P, the freeze timing cannot be specified. 3 In the group, press [Time Strobe], turning it on. 4 Set the following parameters. No. Parameter Adjustment 1 Duration Freeze interval 2 Live Proportion of time between frozen images for inserting live video Freezing using Film Note When the signal format is 1080PsF or 720P, [Film] cannot be selected. 1 Open the DME >Freeze >Freeze menu (4131). 2 In the group, press [Film], turning it on. 3 Set the following parameter. No. Parameter Adjustment 1 Film Rate of film frame advance 247