Sony XVS-7000 Users Guide - Page 457
Setting the Vertical Blanking Interval, and Through Mode, Setting the Safe Title Area
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 457 highlights
2 Select the target output to set. 3 Set the following parameters. No. Parameter Adjustment 2 White Clip Luminance signal white clip value 3 Dark Clip Luminance signal dark clip value 4 Chroma Chrominance signal clip value Clip To return the parameters to their default settings Press [Default]. Setting the Vertical Blanking Interval and Through Mode Note Through mode cannot be set for outputs whose signal format is converted by an output format converter. 1 In the Engineering Setup >Switcher >Output menu (7333), press [V Blank/Through]. The V Blank/Through menu (7333.3) appears. 2 Select the target output to set. 3 Press [V Blank Mask], and set the following parameter. No. Parameter Adjustment 2 Mask End Final value for vertical blanking interval a) a) The adjustment range varies as follows, depending on the signal format. 3840×2160P (also includes output when active area is set to 4096×2160), 1080P: 15 to 41 3840×2160PsF, 1080PsF, 1080i: 7 to 20 720P: 7 to 25 To return the parameters to their default settings Press [Default]. 4 To enable through mode, press [Through Mode], turning it on. Through mode can be enabled for the following outputs. • AUX1 to 48, Edit preview output • Program outputs of each M/E and PGM/PST bank • Clean outputs of each M/E and PGM/PST bank Setting the Safe Title Area Note Safe titles cannot be used on outputs where the active area is set to [4096×2160]. 1 In the Engineering Setup >Switcher >Output menu (7333), press [Safe Title]. The Safe Title menu (7333.4) appears. 2 Select the target output to set. 3 Press [Safe Title], turning it on, to enable the safe title setting in the Misc >Safe Title menu (3221). 4 Perform the following operations. To display a box: Press [Box1] or [Box2], turning it on. To display a cross: Press [Cross], turning it on. To display a grid: Press [Grid], turning it on. 5 Perform the following operations, according to the selection in step 4. When [Box1] or [Box2] is selected: Set the following parameters. No. Parameter Adjustment 2 Box Size Box size 3 Luminance Display color brightness a) a) Adjustable for [Box2]. When [Grid] is selected: In the group, set the grid size relative to the picture frame (80.00%, 85.00%, 90.00%, 100.00%). 6 Perform the following operations, according to the selection in step 4. When [Box1] or [Box2] is selected: In the or group, select the screen aspect ratio (16:9, 14:9, 4:3). When [Grid] is selected: In the group, select the screen aspect ratio (16:9, 4:3). Cropping a 4:3 Mode Image in HD Format In HD format, this allows you to crop an image having a screen aspect ratio of 16:9 to an aspect ratio of 4:3 for output (4:3 crop). 457