Sony XVS-7000 Users Guide - Page 30
Pattern limit setting buttons, External device operation buttons
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Button name KEY1/5, KEY2/6, KEY3/7, KEY4/8, ADD, SHIFT KEY PRIOR (key priority) ALL PRIOR SET (priority set) Description (Assignment in the Setup menu is required.) • Press the [KEY1/5] button, turning it on, to insert or remove key 1 using the next transition. Press the [SHIFT] button, turning it on, and press the [KEY1/5] button to insert or remove key 5. Press and hold the [ADD] button and press the [KEY1/5] button, turning it on, to simultaneously insert or remove key 1 and key 5. • The same applies to the [KEY2/6], [KEY3/7], and [KEY4/8] buttons. • Press the button, turning it on, to enable the key priority setting after the transition. • When the [PRIOR SET] button is lit, the setting for key priority after the transition is used. For details, see "Setting the Key Priority (Transition Control Block)" (page 87). Selects multiple next transitions simultaneously. You set the next transition to select in the Setup menu. For details, see "Setting the Operation Mode of the [ALL] Button in the Transition Control Block" (page 431). Sets the key priority. For details, see "Setting the Key Priority (Transition Control Block)" (page 87). Transition type selection buttons These select the transition type. • MIX button • NAM (non-additive mix) button • SUPER MIX button • PST (preset) COLOR MIX button • WIPE button • DME WIPE button • FM1&2 CLIP, FM3&4 CLIP, FM5&6 CLIP, FM7&8 CLIP (frame memory clip) buttons (The [FM3&4 CLIP], [FM5&6 CLIP], and [FM7&8 CLIP] buttons must be assigned in the Setup menu.) For details about transition types, see "Transition Type" (page 84). When multi-program mode is selected, there may be cases in which two or more transition type selection buttons are lit. For details about multi-program mode, see "Setting the Operation Mode" (page 439). Wipe direction selection buttons These buttons select the wipe direction when the transition type is a wipe or DME wipe. Button name NORM (normal) REV (reverse) NORM/REV (normal/ reverse) Description The wipe proceeds in the direction from black to white of the pattern images, shown in "Wipe Pattern List" (page 494), or in the direction of the arrows. The wipe proceeds in the opposite direction of [NORM]. The wipe direction alternates between normal and reverse every time a transition is executed. TRANS PVW (transition preview) button (Assignment in the Setup menu is required.) With the preview output of the M/E banks and PGM/PST bank, you can check the effect of the image during a transition in advance. During preview, you can use the fader lever, [AUTO TRANS] button, and [CUT] button. The operation of the [TRANS PVW] button can be set to one of the following modes in the Setup menu. • Press the button to start transition preview mode; the mode returns to normal mode when the transition finishes. • The transition preview mode is maintained only while this button is pressed. • Each time the button is pressed, the mode toggles between transition preview mode and normal mode. For details, see "Setting the Button and Fader Lever Operation Mode" (page 430) and "Setting the transition preview mode" (page 467). KF (keyframe) button (Assignment in the Setup menu is required.) You can use the fader lever as a keyframe fader. For details about the keyframe fader, see "Effect Execution" (page 319). Pattern limit setting buttons (Assignment in the Setup menu is required.) These buttons are used to set pattern limits. • PTN (pattern) LIMIT button • LIMIT SET button For details about pattern limits, see "Pattern Limit" (page 93). External device operation buttons (Assignment in the Setup menu is required.) These buttons are used to control playback, stop, and cueup operations on connected devices. • PLAY button • STOP button • CUE button 30