Sony XVS-7000 Users Guide - Page 250

2 Set the following parameters. When [H&V] is selected in the group No. Parameter Adjustment 1 Envelope H Smoothness of envelope in horizontal direction 2 Envelope V Smoothness of envelope in vertical direction When [Size] is selected in the group No. Parameter Adjustment 1 Envelope H Smoothness of envelope To reverse the wave range To reverse the horizontal wave range set with [Range], press [Range Rev H], turning it on. To reverse the vertical wave range set with [Range], press [Range Rev V], turning it on. Mosaic Glass Settings There are two modes: H&V and Size. You can set the size and frequency of waves in the image, the waveform, the amount of wave movement, and the range. In H&V mode, you can also set the wave angle. Applying the Mosaic Glass effect Open the Non Linear >Mosaic Glass menu (4141.2). The items and parameters displayed in the Mosaic Glass menu are the same as for the Wave menu (see page 248). Flag Settings There are two modes: H&V and Size. You can set the size and frequency of waves in the flag, the waveform, the amount of wave movement, and the range. In H&V mode, you can also set the wave angle. Applying the Flag effect Open the Non Linear >Flag menu (4141.3). The items and parameters displayed in the Flag menu are the same as for the Wave menu (see page 248). Twist Settings You can twist the image in the horizontal or vertical direction. You can set the size and frequency of waves in the image, the waveform, the amount of wave movement, and other parameters. Applying the Twist effect In the Non Linear >Twist menu (4141.4), set the following parameters. Parameter group [1/2] No. Parameter Adjustment 1 Amp V Amplitude of twist in vertical direction 2 Freq V Frequency of twist in vertical direction 3 Offset V a) Phase shift offset of twist in vertical direction 4 Speed V b) Speed and direction of twist movement in vertical direction 5 Slant Slant of twist Parameter group [2/2] No. Parameter Adjustment 1 Amp H Amplitude of twist in horizontal direction 3 Offset H Phase shift offset of twist in horizontal direction 5 Slant Slant of twist a) Set when [Lock] is enabled. b) Set when [Lock] is disabled. To stop the wave Press [Lock], turning it on. The wave alternately stops and starts each time the button is pressed. To select the waveform Press [Form] and set the following parameters. No. Parameter Adjustment 1 Form H Type of waveform in horizontal direction a) 2 Form V Type of waveform in vertical direction a) a) 1 (SINE): Sine wave 2 (PARABOLA): Parabolic wave 3 (TRIANGLE): Triangular wave 4 (RECTANGLE): Rectangular wave 5 (CIRCLE): Circular wave 6 (CUBIC): Cubic curve wave Ripple Settings There are four modes: Radial, Angular, Both, and Shape. The direction of modulation differs depending on the mode. You can set the size and frequency of the ripples, their direction and speed, their center point, and other parameters. In Shape mode, you can select ripple shapes other than circles (stars, etc.). 250