Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 145

AG-1006 5 AG-1006 Message Access Gateway mode has been . Message Type LOG Severity INFO Probable Cause Indicates that the Access Gateway mode has been enabled or disabled. Recommended Action Execute the ag --modeshow command to verify the current status of the Access Gateway mode. AG-1007 Message FLOGI response not received for the N_Port connected to the fabric. Message Type LOG Severity WARNING Probable Cause Indicates that the N_Port connected to the fabric switch is not online. The specified N_Port has been disabled. Recommended Action Check the connectivity between the Access Gateway N_Port and the fabric switch port. AG-1008 Message Invalid Port Login (PLOGI) response from the fabric on the N_Port . Message Type LOG Severity WARNING Probable Cause Indicates that the fabric switch management server did not accept the N_Port Login (PLOGI) request sent by the Access Gateway. Recommended Action Check the configuration of the fabric switch connected to the Access Gateway. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 123 53-1002749-01