Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 756

5 SEC-1192 SEC-1192 Message Security violation: Login failure attempt via . Message Type LOG Severity INFO Probable Cause Indicates a serial or modem login security violation was reported. The wrong password was used while trying to log in through a serial or modem connection; the login failed. Recommended Action Use the correct password. SEC-1193 Message Security violation: Login failure attempt via . IP Addr: . Message Type LOG Severity INFO Probable Cause Indicates a specified login security violation was reported. The wrong password was used while trying to log in through the specified connection method; the login failed. Recommended Action The error message lists the violating IP address. Verify that this IP address is being used by a valid switch admin. Use the correct password. SEC-1194 Message This switch does not have all the required PKI objects correctly installed. Message Type LOG Severity WARNING Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. 734 Fabric OS Message Reference 53-1002749-01