Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 747

SEC-1157 5 SEC-1157 Message PID Change failed: . Message Type LOG Severity INFO Probable Cause Indicates the provisioning resources for a security policy failed because of low memory or internal error. The status values can be defined, active, or both. A negative value means that a policy set was failed by the daemon. Recommended Action Retry the failed command. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. SEC-1158 Message Invalid name . Message Type LOG Severity INFO Probable Cause Indicates the specified name is invalid. The name can be a policy name or a switch name. Recommended Action Enter a valid name. SEC-1159 Message Non_Reachable domain . Message Type LOG Severity INFO Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. Fabric OS Message Reference 725 53-1002749-01