Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 167

AUTH-1004 5 AUTH-1004 Message Failed to set type to . Message Type LOG Severity ERROR Probable Cause Indicates that the authUtil command has failed to set the authentication configuration value. The data type can be authentication type, DH group type, hash type, or policy type. Recommended Action Execute the authUtil command again. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1005 Message Authentication file does not exist: . Message Type LOG Severity ERROR Probable Cause Indicates an authentication file corruption. Recommended Action Execute the firmwareDownload command to reinstall the firmware. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1006 Message Failed to open authentication configuration file. Message Type LOG Severity WARNING Probable Cause Indicates an internal problem with the Secure Fabric OS. Recommended Action Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 145 53-1002749-01