Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 203

BLS-1003 5 BLS-1003 Message An IPsec/IKE policy was deleted. Message Type AUDIT | LOG Class CFG Severity INFO Probable Cause Indicates that an Internet Protocol Security (IPsec) or Internet Key Exchange (IKE) policy was deleted and the configuration file was updated. Recommended Action No action is required. BLS-1004 Message Tape Read Pipelining is being disabled slot () port () tunnel (). Message Type LOG Severity INFO Probable Cause Indicates that the Fabric OS version on the remote end of the tunnel does not support Tape Read Pipelining. Recommended Action No action is required. BLS-1005 Message S,P() [OID 0x]: : port faulted due to SFP validation failure. Please check if the SFP is valid for the configuration. Message Type LOG Severity ERROR Probable Cause Indicates a deteriorated small form-factor pluggable (SFP) transceiver, an incompatible SFP transceiver pair, or a faulty cable between the peer ports. Recommended Action Verify that compatible SFP transceivers are used on the peer ports, the SFP transceivers have not deteriorated, and the Fibre Channel cable is not faulty. Replace the SFP transceivers or the cable if necessary. Fabric OS Message Reference 181 53-1002749-01